涂层厚度测量仪 Coating Thickness Meter MEGA-CHECK Pocket FN
|
|
The new MEGA-CHECK Pocket FN device use a digital measuring probe, in which the analog signals are digitised directly in the probe and transferred digitally via the probe cable to the measuring device.
This new technology is very immune to interference and makes high accuracy, reproducible measurements possible.
The probe cable is connectable from both sides (control unit and probe) and therefore very servicefriendly, because just the cable needs to be replaced in case it gets broken. The housing, with its easy to handle format and rubber reinforced sides, is hardly bigger than the measuring probe.
MEGA-CHECK Pocket FN includes both the magnetic induction and eddy current techniques with a dual-function probe. The following
measurements can be performed:
On iron and magnetic steel all nonconductive coatings (paint, varnish, plastics, rubber, ceramics) and galvanized films (except niquel).
On non-ferrous metals (aluminium,bronze, brass, copper, nonmagnetic steel) all nonconductive coatings (paint, varnish, plastics, anodizing on aluminium).
|
What’s new is the simple operation of the devices with just one key, ideal for users, who don't require any documentation of the measurement data.
With the new type of ASR technology (Automatic Statistic Result - details see video clip), it is nevertheless possible to display the statistics of the last series of measurements. To do this the probe plug is simply disconnected from the device. After that the device is switched on again and the Min., Max. and Mean statistical values and Standard Deviation of the last series of measurements are displayed automatically in sequence.
The user doesn’t have to carry out any complicated settings.
The MEGA-CHECK Pocket devices are of high quality and manufactured exclusively in Germany.
Incl. measuring probe PFN-52D , probe cable, calibration set, carrying case and batteries.
|
ASR-technology (Automatic Statistic Result):
Start video clip >>
|
Technical data: |
Function |
MEGA-CHECK Pocket FN |
Measurement of paint, varnish, plastics
and galvanizing on iron and steel |
|
Measurement of non-conductive coatings
(paint, varnish, plastics, anodizing)
on non-ferrous metals |
|
Measuring Range: |
FE: 0 - 5000 µm
NFE: 0 -2500 µm
|
Resolution:
1 - 100 µm: 0.1 µm
> 100 µm: 1 µm
> 2000 µm: 0.01 mm
|
|
Accuracy:
below 100 µm: ± 1 µm
100 - 1000 µm: ± 1 %
1000 - 2000 µm: ± 3 %
above 2000 µm: ± 5 %
|
|
Probes available:
Smallest Area:
Smallest curvature radius convex:
Smallest curvature radius concave:
|
PFN-52D
Ø 6 mm
FE: 4 mm / NFE: 6 mm
38 mm
|
Power Supply:
2 x 1.5V AA Mignon batteries,
2 x 1.2V AA rechargeable batteries on request
|
|
One / Two-Point calibration: |
|
Automatic Switch Off: |
X |
Conversion µm - mils: |
X |
Statistics
(MAX.MIN. MEAN. NO. STD.DEV.): |
Last series of 100 measurements
(ASR- technology) |
Display of statistics: |
|
Display LCD, 3 ½ digits: |
X
|
Dimensions: |
105 x 65 x 26 mm
|
Weight incl. Batteries: |
137 g
|
Optionals: |
Calibration Foil Set
|
Standards: DIN, ISO, ASTM, BS |
|
|