详细说明 标准信号隔离放大器 VariTrans® B10000 knick
The world’s first 3-port standard signal isolator in a 6 mm modular housing.
|
|
|
Product description
|
|
|
Image Typical applications
|
|
|
Facts
|
|
|
Product Line
|
|
|
|
Dimension drawings
|
|
|
Schematic diagram
|
|
|
Specifications
|
|
|
Downloads
|
|
|
|
|
|
|
The Task
Isolation and, if necessary, conversion of 0 ... 20 mA, 4 ... 20 mA as well as 0 ... 10 V standard signals. If you have limited space and budget, there could still be difficulties when it comes to selecting a suitable isolator despite the standard requirements for transfer in the selection.
The Problems
Up to now the only way of reducing costs substantially was to opt for low quality products. As a large number of different signals also required a large number of isolators, this also led to considerable stockkeeping costs.
The Solution
With its extreme compactness and low self-heating, the new standard-signal isolator from Knick sets new standards. The VariTrans® B 10000 is available with nine selectable, calibrated ranges or as one of eight different variants with fixed settings. In any case it has an extremely attractive price.
The Housing
Measuring only 6 mm, the closed modular housing of the VariTrans® B 10000 allows up to 163 active isolation amplifiers per meter top-hat rail. A pluggable cross-connection for power supply ensures quick and therefore inexpensive mounting.
The Advantages
In spite of the reduced space, the VariTrans® B 10000 provides true 3-port isolation between input, output, and power supply to prevent parasitic voltages.
The Technology
Analog signal processing with transformer isolation ensures excellent signal transmission. The input and output ranges can easily be selected using DIP switches.
Facts |
|
- Safety in the smallest space 3-port isolation in 6-mm housing
- Space-saving assembly No ventilation clearances required since there is no noticeable heat development
- Attractive price One of the cheapest quality isolators on the market
- Long service life Extremely low failure rate (MTBF of 440 years) due to reduced self-heating
- Good accuracy Exemplary signal transmission for standard applications
- Low-cost installation Pluggable cross-connections allow easy and extremely costefficient connection of power supply to several VariTrans® B 10000 units
- Calibrated range selection without complicated adjustments
- 8 fixed range variants if range shifting is to be avoided
- 3-port isolation prevents incorrect measurements caused by potential differences
- Simple configuration DIL switches accessible from outside
- 5-year warranty
|
|
Dimension drawings and terminal assignments
|
|
|
|
Specifications |
|
Input data |
|
|
Inputs |
0 ... 20 mA |
Calibrated range selection or fixed settings |
|
4 ... 20 mA |
(see Product Line) |
|
0 ... 10 V |
|
|
Input resistance |
Current input: |
Voltage drop <0.1 V at 20 mA |
|
|
with open current output or power failure approx. 350 mV |
|
Voltage input: |
Approx. 100 kohms |
|
|
Overload |
Current input: |
<100 mA |
|
Voltage input: |
Voltage limited to 30 V by suppressor diode, |
|
|
max. permitted continuous current 3 mA |
|
Output data |
|
|
Outputs |
0 ... 20 mA |
Calibrated range selection or fixed settings |
|
4 ... 20 mA |
(see Product line) |
|
0 ... 10 V |
|
|
Load |
With output current: |
≤10 V (≤500 ohms at 20 mA) |
|
With output voltage: |
≤1 mA (≥10 kohms at 10 V) |
|
|
Offset |
<20 µA or <10 mV |
|
|
Residual ripple |
<10 mVrms |
|
Response |
|
|
Gain error |
<0.3 % full scale |
|
Additional error in live-zero operation 20 μA or 10 mV |
|
|
Cut-off frequency |
>100 Hz –3 dB |
|
|
Temperature coefficient |
<0.01 %/K full scale |
Average TC in specified operating temperature range |
|
|
0 ... +55 °C, reference temperature 23 °C |
|
Power supply |
|
|
Power supply |
24 V DC (±15 %), approx. 0.6 W |
|
The power supply can be routed from one device to another via cross-connections. |
|
Isolation |
|
|
Galvanic isolation |
3-port isolation between input, output, and power supply |
|
|
Test voltage |
0.51 kV AC, 50 Hz, across all circuits |
|
|
Working voltage |
Up to 100 V AC/DC across all circuits with overvoltage category II and pollution degree 2 |
(basic insulation) |
to EN 61010 Part 1. |
|
For applications with high working voltages, you should ensure there is sufficient spacing or |
|
isolation from neighboring devices and protection against electric shocks. |
|
Standards and approvals |
|
|
EMC |
Product family standard: |
EN 61326 |
|
Emitted interference: |
Class B |
|
Immunity to interference: |
Industry |
|
Slight deviations are possible during interference |
|
|
Approvals |
cURus, File No. E 220033 |
|
Standards: UL 508 and CAN/CSA 22.2 No. 14-95 |
|
|
Other data |
|
|
MTBF |
Approx. 440 years |
|
Mean Time Between Failures (MTBF) according to EN 61709 (SN 29500) |
|
Conditions: stationary operation in well-kept rooms, average ambient temperature 40 ºC, |
|
no ventilation, continuous operation |
|
|
Ambient temperature |
Operation: |
0 ... +55 ºC when mounted in row |
|
Transport and storage: |
–40 ... +85 ºC |
|
|
Design |
Modular housing with screw terminals, |
|
width 6.1 mm, see dimension drawing for further dimensions |
|
|
Protection class |
IP 20 |
|
|
Mounting |
For 35-mm top-hat rail to EN 60715, see dimension drawings for conductor cross section |
|
|
Weight |
Approx. 60 g |
|
Product line |
|
Devices |
|
|
Order no. |
|
|
|
Input |
Output |
|
|
B 10000 with calibrated |
0 ... 20 mA, |
0 ... 20 mA, |
B 10000 F0 |
input and output selection |
4 ... 20 mA, |
4 ... 20 mA, |
|
0 ... 10 V |
0 ... 10 V |
|
|
B 10000 with |
0 ... 20 mA |
0 ... 20 mA |
B 10016 F0 |
fixed settings |
0 ... 20 mA |
4 ... 20 mA |
B 10017 F0 |
|
0 ... 20 mA |
0 ... 10 V |
B 10018 F0 |
|
4 ... 20 mA |
0 ... 20 mA |
B 10026 F0 |
|
4 ... 20 mA |
4 ... 20 mA |
B 10016 F0 |
|
4 ... 20 mA |
0 ... 10 V |
B 10028 F0 |
|
0 ... 10 V |
0 ... 20 mA |
B 10036 F0 |
|
0 ... 10 V |
4 ... 20 mA |
B 10037 F0 |
|
0 ... 10 V |
0 ... 10 V |
B 10038 F0 |
|
Accessories |
|
|
Order No. |
|
|
|
Cross-connections |
Pluggable cross-connection for looping through of the power supply for up to 41 power supply connections of theVariTrans® B 10000, splittable. |
|
ZU 0542 |
|
|
|
Power supply |
24 V DC via screw terminals or DIN rail bus connectors |
|