|
|
ST189
With the new ST189 we present you a further controller for DIN-rail mounting.
Equipped with six switching relays, three sensor inputs, our new cooling software and an ST-Bus interface, it is qualified for a broad application area. |
|
|
|
ST552-G "glass controller"
This newly developed touch panel based on mineral glass can easily be integrated into existing plants.
Its sturdy surface can replace our approved foil keyboards in environments with high mechanical or chemical loads. |
|
|
|
New hollow jet-wave soldering machine
The new EC-directive 2002/95/EG (RoHS directive, "Reduction of Hazardous Substances") will be enforced as from July 1st, 2006. On the basis of this directive no more lead containing substances may be used in electrical or electronic equipment.
Our new soldering machine of the company "Kirsten Soldering AG" is used since October 2004. It enables us to use lead-free solder to meet these new standards already today. |
|
|
|
ST180
ST181 controller for cooling applications
The ST181 proves itself at simple technical cooling processes. The outputs for compressor and ventilator are designed for high-performance, i.e. for the direct motor capacity of max. 1 HP. As simple cooling units often tend to be very price sensitive, the completeness of the regulation unit (no terminal box, no power switch) together with its wiring guarantee an inexpensive few-minute-assembly.
|
ST182 controller for cooling applications with control for the number of revolutions of the DC ventilator and real-time clock
This ST182 is a genuine speciality for you: a cooling regulator with a 24V DC revolution counting ventilator. The maximum ventilation is 6W, revolutions can be reduced to 20% which results in a minimal air flow. Due to the galvanic separation in the ST182 regulation unit, the low-voltage ventilator can also be safely operated in a wet environment. The timer offers a regular weekly time management.
|
ST181 hot counter control unit
Here it is, finally, the solution for hot counters you have been waiting for. Extremely compact considering its high performance, this regulator is capable to independently control up to four warm water baths by help of four 12A-contacts and four temperature sensors. Inputs for float switches (switching or capacitive measuring elements) provide an automatic water supply of the water basin. There are additional keys and power outputs to control lighting and infrared heating which are usually applied in connection with hot counters.
|
ST180 PID temperature controller
The multi-sensor input of the ST180 PID controller provides employment of all usual temperature sensors or measurement indicators (0... 10V, 4...20mA). The installed electronic power switch element is optimal for a fast and extremely precise regulation - and this practically for an infinite duration. A programmable second contact offers the possibility of alarm signals. Its sensitivity for interlacing opens doors to remote control, remote input of parameters and data logger functions. We therefore recommend the components of our proven data logger system.
|
|
|
|
|
|
Data logger
PC software David V1.0x
Our data logger system offers a reliable storage of the measuring data in a separate device. This data can be read, visualized and configured by means of the PC software "David V1.0x". This concept unites data security and easy handling with uncomplicated cross-linking over our LON system. |
TRL sensor module (data logger compatible)
- 8 universal sensor inputs (PTC, PT100, I, U,...)
- 2 digital inputs (Frequenz, PWM,...)
- buzzer
- alarm relay
- mains voltage 230 V AC
- Enclosure to IP66
|
|
|