GS-THERMO…
Terminal
Plug-screw terminal 8pin
max. 2,5 qmm
set threshold value (switch)
set hysteresis value
LED relays on
1: N.C. contact
2: N.O. contact
3: C. contact
4: input thermocouple +
5: GND
6: input thermocouple -
7-8: supply 24V AC/DC
LED Power
Technical Data
Input, pin 4/6 order thermocouple type
Thermocouple type E 60,9 μV / °C, NiCr-CuNi
“ type J 51,7 μV / °C, Fe-CuNi
“ type K,T 40,6 μV / °C, NiCr-Ni, Cu-CuNi
“ type R,S 5,95 μV / °C, Pt-PtRh, Pt-PtRh
Output relays pin 1-3 max. 8A, max. 250V AC
Peak current max. 15A, 4sec.
Breaking capacity max. 2000VA
Bounce time max. 2ms
Threshold range input 0-100%
Hysteresis range min 2 – 50%
Power supply 24V AC/DC, +-15%
Power current max. 70mA
Isolation input/contact 4 kV
Isolation input/supply 500Vss
Operating temperature -10 - +50°C
Storage temperature -30 - +80°C
Construction PCB mount. TS35, EN50022
Weight 92 g
Dimensions 24 x 72 x 94 mm (WxHxD)
Limit controller for input thermocouple sensor. Please order the thermocouple type and the range.
The threshold value and the hysteresis are adjustable with potentiometers.
Output channel with two–way contact. Electrical isolation between input, relays contact and power supply.
RINCK ELECTRONIC GMBH
Kleekamp 6
D-27356 Rotenburg (Wümme)
B 534 E_GS-THERMO 05.06.07
LIMIT CONTROLLER GS-THERMO…
Input thermocouple, order type and measuring range
Output changeover contact, limit switch
Power supply 24 V AC/DC