英国REO电阻 滤波器 变压器
产品系列:
制动电阻
驱动产品
EMC滤波器
EN系列
高功率变阻器
医学隔离变压器
晶闸管功率控制器
环形变压器
可变变压器
新产品
Braking Resistors
BW 152
100 - 250 W Flat Resistor - Typical benefits include, easy installation, compact construction, suitable for use with any frequency drive and requires little floor space.
read more >>
BW 153
Compact braking resistor - Typical benefits include easy installation, short ciruit, suitable for use with any frequency drive, can be used in any environment and the unit is highly resistive...
read more >>
BW155/1000
1000W Resistor - Typical benefits include, compact construction, easy installation, suitable for use with any frequency drive and requires no extra floor space. Remember if you do not see your required...
read more >>
BW155/1000/100/TS
1000W Resisitor - Typical benefits include, compact construction, easy installation, suitable for use with any frequency drive and requires no extra floor space.
read more >>
BW155/2000
2000W Resistor - Typical benefits include, compact construction, easy installation, suitable for use with any frequency drive and requires no extra floor space. Remember if you do not see your required...
read more >>
BW101/540
540 W, 700 V Resistor. Low cost, compact construction, easy installation and zinc plated touchproof enclosure alllows easy solution to dynamic braking issues. Remember if you do not see your required Ohmic...
read more >>
BW103/600
600 W, 700 V, Resistor - Typical benefits include, compact construction, easy installation and zinc plated touchproof enclosure. Additional options for connecting cable, temperature switch and terminal cover. Remember if you...
read more >>
BW103/1000
1000 W, 700 V, Resistor - Typical benefits include, compact construction, easy installation and zinc plated touchproof enclosure. Additional options for connecting cable, temperature switch and terminal cover. Remember if you...
read more >>
BW101/2000
2000 W, 700 V Resistor - Typical benefits include, compact construction, easy installation and zinc plated touchproof enclosure. Able to be mounted outside of the main switching cabinet. Remember if you do...
read more >>
BW105/3000
3000 W, 700 V, Typical benefits include, compact construction, easy installation and zinc plated touchproof enclosure. Additional options for connecting cable, temperature switch and terminal cover. Can easily be parallel...
read more >>
BW105/4000
4000 W, 700 V - Typical benefits include, compact construction, easy installation and zinc plated touchproof enclosure. Additional options for connecting cable, temperature switch and terminal cover. Can easily be parallel...
read more >>
Drive Products
CNW 891 Single Phase DC Link Choke (1 Line)
For smoothing the intermediate circuit current and for reduction of mains interference with voltage intermediate circuit inverters, improvement of efficiency of inverter, (passive Power Factor Correction). Damping of load current...
read more >>
CNW854
3-Line motor chokes, for use with variable speed drives. Available in the range 8 A to 1200 A. Designed to improve waveform of applied voltage to improve motor life and...
read more >>
CNW903
3 phase 500V line reactors, with 4 % voltage drop at rated current. Available with current ratings from 3 A to 160 A. Designed to be used at the input of...
read more >>
CNW905-CL
3 phase 500V line reactors, with 2 % voltage drop at rated current. Available with current ratings from 3 A to1200 A. Used to reduce the input harmonics of variable speed...
read more >>
CNW933
400V 3 line sinusoidal filters, available in the range 2 A to 115 A. Are used in applications that require long cable runs and where the benefits of a sinusoidal...
read more >>
EMC Filters
CNW 204 book style filters
Book style filters are designed to have a small footprint so that they take up little back panel space and are easy to fit. They are suitable for use with...
read more >>
CNW 703 Transient Suppressor
Protection device for use with new or existing equipment. Efficient protection against high voltages, lightning strikes and transients. Also provides RFI attenuation down to approximately 50 dB at 1 MHz. By...
read more >>
CNW101
Single Phase, High Performance range of EMC Filters, offering comparable performance to many other manufacturers' two stage units. (See case study in EMC Book for more information on this). Available in 3...
read more >>
CNW102
Single Phase, High Performance range of 2-Stage EMC Filters. Available in 3 Amp to 20 Amp ratings. Provide very high attenuation in both common and differential mode. Used to ensure error free operation...
read more >>
CNW103
High Performance range of 3-line EMC Filters. Available in 3 Amp to 150 Amp ratings. Provide high attenuation in both common and differential mode. Designed for use in industrial process and control applications, that require...
read more >>
CNW104
High Performance, 2-stage, 3-line EMC Filters. Available in 3 Amp to 150 Amp ratings. Provide very high attenuation in both common and differential mode. Designed for use in demanding industrial process and control applications, typically...
read more >>
CNW105
High Performance, 4-line EMC Filters. Available in 3 Amp to 150 Amp ratings. Provide very high attenuation in both common and differential mode. Designed for use with asymmetric loads, where noise is likely to...
read more >>
CNW107.1
High Performance, high current 3-line EMC Filters. Available for currents in the range 280 Amp to 1600 Amp. Provides high attenuation in both common and differential mode. Designed to be used to provide noise suppression...
read more >>
CNW114
High Performance, high current 3-line EMC Filters. Available for currents in the range 8 Amp to 1200 Amp. Provide high attenuation in both common and differential mode. Provides noise suppression in entire industrial systems, especially...
read more >>
CNW141
Multistage filter, 1-Line filter, providing over 100 db of suppression from 10 kHz to 1 GHz. Available in 60 A, 100 A, 150 A, 250 A and 400 A ratings. Designed...
read more >>
CNW142
Multistage filter, 2-Line filter, providing over 100 db of suppression from 10 kHz to 1 GHz. Available in 30 A, 60 A, 150 A, 200 A, 250 A and 400...
read more >>
CNW143
Multistage, 3-Line filter, providing over 100 db of suppression from 10 kHz to 1 GHz. Available in 16 A, 30 A, 50 A, 100 A, 150 A and 200 A...
read more >>
CNW192
Single phase PCB filter, available in 3 Amp or 6 Amp and designed to be easily integrated into applications where a large chassis-type filter is not an option for space...
read more >>
CNW202
High Performance, 2-stage, Single Phase EMC Filters. Available in 7 Amp to 180 Amp ratings. Providing very high attenuation in both common and differential mode. Designed for use in demanding industrial...
read more >>
CNW203
High Performance, 3-Line EMC filters. Available in 16 A, 25 A or 36 A ratings. Providing cost-effective attenuation in both common and differential mode. Designed for use in industrial process and control applications Connection using...
read more >>
CNW541
High Performance, 2-stage, single phase EMC filters. Available in 8A - 30A ratings. Providing high attenuation in both common and differential mode. Low leakage design is suitable for use in medical...
read more >>
CNW542
High performance, 2-stage, single phase EMC filters. Available in 3A - 30A ratings. Providing very high attenuation in both common and differential mode. Low leakage design is suitable for use in...
read more >>
CNW543
High Performance, three phase EMC Filters. Available in 10A - 30A ratings. Providing good performance in both common and differential mode. Connection using IP20 rated screw terminals. Unique housing offers the user...
read more >>
CNW961
The REO Sinusoidal Filter Plus ++ suppresses interference that appears on motor conductors but also on the earth conductors. The unit shunts unwanted bearing currents to the DC-link so that...
read more >>
terms | site map | REO (UK) Ltd, Units 2-4 Callow Hill Road, Craven Arms Business Park, Craven Arms, Shropshire SY7 8NT | Tel: +44 (0)1588 673411 | Email: main@reo.co.uk
High Power Rheostat
High Power Rheostat
High power rheostat suitable for laboratory use. This unit is protected with a perforated pressed steel cover and laboratory terminals are provided so that the unit can be used as...
read more >>
Medical Isolation Transformers
REO PROMED
REO MEDICAL ISOLATION TRANSFORMERS are for use with medical electrical devices and non-medical electrical devices in patient environments and/or areas for medical use, to provide safe galvanic separation between primary and...
read more >>
REO-MED
The REO-MED range of Medical Isolation Transformers (MIT's) have been designed to comply with the requirements of IEC 60601-1, enabling correctly connected and applied equipment to be certified to be...
read more >>
REO-UNIMED Transformers
UNIMED is a range of toroidal, medical safety-transformers with ratings from 100VA to 300VA, that are designed for use in medical equipment. They are fully encapsulated, compact and easy to...
read more >>
Special Offers
BW101 Braking Resistor
BW101 Series, Panel Mounting Braking Resistors 180 - 2000 Watts
read more >>
BW153 Braking Resistor
Compact braking resistor - Typical benefits include easy installation, short ciruit, suitable for use with any frequency drive, can be used in any environment and the unit is highly resistive...
read more >>
CNW 541 Single-Phase high-attenuation filters (8A - 30A)
For use with switch-mode power supplies in industrial electronics,data systems, telecommunications, engineering and medical equipment.
read more >>
CNW 854 Three Phase Motor Choke
The conventional output-choke has a very good storage capacity. It functions like a typical series inductance and smoothes the symmetrical, effective current and the asymmetrical, parasitic current. The voltage rise...
read more >>
CNW M 933 Encapsulated Sinusoidal Filter
Three-phase sinusoidal filter. Bolt-on accessories for IP00, IP20 and IP64.
read more >>
CNW101 Single Phase EMC Filter
Single Phase, High Performance range of EMC Filters, offering comparable performance to many other manufacturers' two stage units. (See case study in EMC Book for more information on this). Available in 3...
read more >>
SAG Motor Soft Start
The Motor Soft Start provides an adjustable voltage ramp, which provides a smooth start-up and,at the same time, current inrush is limited. Thus motor conductors and fuses can be more suitably...
read more >>
Thyristor Power Controllers
3-Phase Thyristor Power Regulator
REOTRON MDW series, three-phase, microprocessor controlled, thyristor regulators are suitable for resistive or resistive/inductive loads, especially those with a high Rcold / Rwarm coefficient. Status relays indicate unit ready and...
read more >>
MDW 700/25
REOTRON MDW series, three-phase, microprocessor controlled, thyristor regulators are suitable for resistive or resistive/inductive loads, especially those with a high Rcold / Rwarm coefficient. Status relays indicate unit ready and...
read more >>
Single-Phase Thyristor Power Regulators
REOTRON MEW series, single-phase, microprocessor controlled, thyristor regulators are suitable for resistive or resistive/inductive loads, especially those with a high Rcold / Rwarm coefficient. Status relays indicate unit ready and...
read more >>
Toroidal Transformers
RFTO
High quality, low cost, fixed toroidal transformers, open style with a single 230V ac 50/60Hz primary winding and twin secondary windings 2x12V. Conforms to EN61558, VDE 0551.
read more >>
RSK
High quality, low cost, fixed toroidal transformers, enclosed style with a single 230V ac 50/60Hz primary winding and twin secondary windings 2x12V. Conforms to EN61558, VDE 0551.
read more >>
Vareosoft SAG Softstarts
SAG 09
The 4kW Motor Soft Start 3 x 8.5Amps provides an adjustable voltage ramp, which provides a smooth start-up and, at the same time, current inrush is limited. Thus motor conductors and fuses can...
read more >>
SAG 16
The 7.5kW Motor Soft Start 3 x 15.5Amps provides an adjustable voltage ramp, which provides a smooth start-up and, at the same time, current inrush is limited. Thus motor conductors and fuses can...
read more >>
SAG 23
The 11kW Motor Soft Start 3 x 22.5 Amps provides an adjustable voltage ramp, which provides a smooth start-up and, at the same time, current inrush is limited. Thus motor conductors and fuses...
read more >>
SAG 32
The15kW Motor Soft Start 3 x 30 Amps provides an adjustable voltage ramp, which provides a smooth start-up and, at the same time, current inrush is limited. Thus motor conductors and fuses can...
read more >>
SAG 45
The 22kW Motor Soft Start 3 x 43 Amps provides an adjustable voltage ramp, which provides a smooth start-up and, at the same time, current inrush is limited. Thus motor conductors and fuses...
read more >>
SAG 63
The 30kW Motor Soft Start 3 x 58 Amps provides an adjustable voltage ramp, which provides a smooth start-up and, at the same time, current inrush is limited. Thus motor conductors and fuses...
read more >>
SAG 75
The 37kW Motor Soft Start 3 x 72 Amps provides an adjustable voltage ramp, which provides a smooth start-up and, at the same time, current inrush is limited. Thus motor conductors and fuses...
read more >>
Switch-on Current Limiter
The ED1/16 Switch-on Current Limiter is for loads that produce a high inrush current. The unit has been designed for use with transformers and small motors it prevents the faulty...
read more >>
Variable Transformers
Variable Motorised Transformers, 3 x 400 V, 1 A to 32 A per phase
Available in current ratings from 3 x 1 A and 3 x 32 A, with nominal output voltage of 3 x 0 - 400 V (3 x 450 V for 18...
read more >>
New Products
Single-Phase Thyristor Power Regulators
REOTRON MEW series, single-phase, microprocessor controlled, thyristor regulators are suitable for resistive or resistive/inductive loads, especially those with a high Rcold / Rwarm coefficient. Status relays indicate unit ready and...
Prices from £449.21
3-Phase Thyristor Power Regulator
REOTRON MDW series, three-phase, microprocessor controlled, thyristor regulators are suitable for resistive or resistive/inductive loads, especially those with a high Rcold / Rwarm coefficient. Status relays indicate unit ready and...
Prices from £809.24
REO-MED
The REO-MED range of Medical Isolation Transformers (MIT's) have been designed to comply with the requirements of IEC 60601-1, enabling correctly connected and applied equipment to be certified to be...
Prices from £217.89
BW155/1000/100/TS
1000W Resisitor - Typical benefits include, compact construction, easy installation, suitable for use with any frequency drive and requires no extra floor space.
Only £68.85
REO PROMED
REO MEDICAL ISOLATION TRANSFORMERS are for use with medical electrical devices and non-medical electrical devices in patient environments and/or areas for medical use, to provide safe galvanic separation between primary and...
Prices from £744.24
MDW 700/25
REOTRON MDW series, three-phase, microprocessor controlled, thyristor regulators are suitable for resistive or resistive/inductive loads, especially those with a high Rcold / Rwarm coefficient. Status relays indicate unit ready and...
Only £809.24
RFTO
High quality, low cost, fixed toroidal transformers, open style with a single 230V ac 50/60Hz primary winding and twin secondary windings 2x12V. Conforms to EN61558, VDE 0551.
Prices from £17.54
RSK
High quality, low cost, fixed toroidal transformers, enclosed style with a single 230V ac 50/60Hz primary winding and twin secondary windings 2x12V. Conforms to EN61558, VDE 0551.
Prices from £16.79
Switch-on Current Limiter
The ED1/16 Switch-on Current Limiter is for loads that produce a high inrush current. The unit has been designed for use with transformers and small motors it prevents the faulty...
Only £74.57
CNW961
The REO Sinusoidal Filter Plus ++ suppresses interference that appears on motor conductors but also on the earth conductors. The unit shunts unwanted bearing currents to the DC-link so that...
Prices from £325.10
BW 152
100 - 250 W Flat Resistor - Typical benefits include, easy installation, compact construction, suitable for use with any frequency drive and requires little floor space.
Prices from £31.88
BW 153
Compact braking resistor - Typical benefits include easy installation, short ciruit, suitable for use with any frequency drive, can be used in any environment and the unit is highly resistive...
Prices from £46.36
CNW 204 book style filters
Book style filters are designed to have a small footprint so that they take up little back panel space and are easy to fit. They are suitable for use with...
Prices from £84.71
Good EMC Engineering Practices in the Design and Construction of Fixed Installation
REO’s new handbook provides an extensive range of essential information relating to EMC considerations. In its 12 chapters, it covers compliance, relevant EU Directive and Standards, good practices, EM mitigation...
Only £10.95
CNW 891 Single Phase DC Link Choke (1 Line)
For smoothing the intermediate circuit current and for reduction of mains interference with voltage intermediate circuit inverters, improvement of efficiency of inverter, (passive Power Factor Correction). Damping of load current...
Prices from £24.34
REO-UNIMED Transformers
UNIMED is a range of toroidal, medical safety-transformers with ratings from 100VA to 300VA, that are designed for use in medical equipment. They are fully encapsulated, compact and easy to...
Prices from £49.36
BW101 Braking Resistor
BW101 Series, Panel Mounting Braking Resistors 180 - 2000 Watts
Only £74.02
CNW M 933 Encapsulated Sinusoidal Filter
Three-phase sinusoidal filter. Bolt-on accessories for IP00, IP20 and IP64.
Only £207.71
|