|
瑞典JOHNSON PUMP泵 Centrifugal Pumps
Vertical & Horizontal Single Stage Pumps - Johnson Pump brand
 |
  |
 |
|
| Single Stage Pumps |
Multistage Pumps » |
Magnetic Drive Pumps » |
Hygienic Pumps |
Vertical/Horizontal; CombiBloc, CombiChem, CombiDirt, CombiNorm, CombiPro, CombiFlex, CombiSump, CombiWell Inline; CombiLine, CombiLine Bloc Self-priming; CombiPrime, FreFlow, KGE
|
Vertical/Horizontal;
MCH, MCV
Self-priming; MCHZ |
Heavy duty; CombiMag, CombiMagBloc
Non metallic; MDR |
Contact your local sales representative for advice
|
Vertical and Horizontal Single Stage Pumps
CombiBloc, CombiChem, CombiDirt, CombiNorm, CombiPro, CombiFlex, CombiSump, CombiWell
|
| CombiBloc |
| Close-coupled horizontal centrifugal pump to EN 733 (DIN 24255) |
| Features |
Suitable for
|
| • |
Compact, economic, space saving construction |
Low viscosity, clean or slightly contaminated and aggressive liquids |
| • |
No shaft alignment required |
| • |
Outstanding hydraulic performance |
 |
| • |
High efficiency impeller |
| • |
Closed impeller with back vanes providing axial balancing of impeller loads |
| • |
Easy maintenance |
| • |
Low maintenance cost |
| • |
Easy to install without heavy foundation |
| • |
Atex certification |
| • |
Suitable for vertical arrangement |
| • |
Standard mechanical shaft seal EN 12756 (DIN 24690) |
| |
|
Technical data
|
| Casing: |
Cast iron, Nodular cast iron, Bronze, Stainless steel |
Max. liquid temp: |
120°C |
| Impeller: |
Cast iron, Bronze, Stainless steel |
Max. pressure: |
1000 kPa (10 bar) |
| Max. capacity: |
850 m3/h |
Max. speed: |
3 600 rpm |
| Max. delivery head: |
105 m |
|
|
 Downloads (Sales brochure, Data Sheet, Instruction Manual)
For downloadable CAD drawings to assist in planning our pumps into your system go to
Technical info/Dimensional Drawings. |
|
 Back to the Top |
| CombiChem |
| Horizontal centrifugal pump to ISO 2858 (EN 22858 (DIN 24256)) and ISO 5199 |
| Features |
Suitable for
|
| • |
Standardized and modular design |
Low viscosity, clean or slightly contaminated liquids, especially in the chemical industry |
| • |
Flanges according to ISO 7005 PN 16 |
| • |
For stainless steel execution 150 lbs ANSI B 16.5 available |
 |
| • |
Outstanding hydraulic performance |
| • |
High efficiency impeller |
| • |
Closed impeller with back vanes providing axial balancing of impeller loads |
| • |
Half open impeller with wear plate and external adjustment |
| • |
Easy maintenance through the Back-Pull-Out principle |
| • |
Single unbalanced / balanced seals to EN 12756 (DIN 24960) |
| • |
Single and double cartridge seals with seal support system |
| • |
Quenched shaft sealing |
| • |
Atex certification |
| • |
Dry-shaft design, pumped liquid not in contact with the shaft |
| • |
Heating jacket optional |
| • |
Robust shaft design |
| • |
Extended life time |
|
| • |
2-Deepgroove ball bearings or double row angular contact thrust bearing and cylindrical roller bearing |
| • |
Grease or oil bath lubricated bearings |
|
Technical data
|
| Casing: |
Cast iron, Nodular cast iron, Bronze, Stainless steel |
Max. liquid temp: |
200°C |
| Impeller: |
Cast iron, Bronze, Stainless steel |
Max. pressure: |
1600 kPa (16 bar) |
| Max. capacity: |
800 m3/h |
Max. speed: |
3 600 rpm |
| Max. delivery head: |
160 m |
|
|
Downloads (Sales brochure, Data Sheet, Instruction Manual)
For downloadable CAD drawings to assist in planning our pumps into your system go to
Technical info/Dimensional Drawings. |
Back to the Top |
| CombiDirt |
| Robust centrifugal pump for liquids containing solids |
| Features |
Suitable for
|
| • |
Can handle solids |
Transporting liquids containing solids of all sorts. CombiDirt is also capable of handling gaseous liquids and media requiring self priming conditions. |
| • |
Vortex technology |
| • |
Prevent clogging |
| • |
Standardized and modular design
|
|
| • |
Flanges according to ISO 7005 PN 16
|
| • |
Available in horizontal and vertical execution
|
| • |
Self-priming option available
|
| • |
Atex certification
|
| • |
Handle liquids with varying amounts of gas
|
| • |
Impeller with back vanes providing solids kept away from shaft sealing area
|
| • |
Easy maintenance through the Back-Pull-Out principle
|
| • |
Single unbalanced mechanical seals to EN 12756 (DIN 24960)
|
| • |
Quenched shaft sealing
|
| • |
Gland packing
|
| • |
Dry-shaft design, pumped liquid not in contact with the shaft
|
| • |
Robust shaft design
|
| • |
Extended life time
|
| • |
Double row angular contact thrust bearing and cylindrical roller bearing
|
| • |
Grease or oil bath lubricated bearings
|
| • |
In vertical execution many mounting options (floor, bulkhead)
|
| • |
In vertical execution eight positions possible between suction and delivery connections |
Technical data
|
| Casing: |
Cast iron, Nodular cast iron, Stainless steel, Hard faced Chromium steel, Steel alloys |
Max. liquid temp: |
80°C |
| Impeller: |
Cast iron, Nodular cast iron, Stainless steel, Hard faced Chromium steel, Steel alloys |
Max. pressure: |
1000 kPa (10 bar) |
| Max. capacity: |
420 m3/h |
Max. speed: |
1800 rpm |
| Max. delivery head: |
40 m |
Max. free passage: |
100 mm |
| Downloads (Sales brochure, Data Sheet, Instruction Manual) |
|
Back to the Top |
| CombiNorm |
| Horizontal centrifugal pump to EN 733 (DIN 24255) |
| Features |
Suitable for
|
| • |
Standardized and modular design
|
Low viscosity, clean or slightly contaminated liquids |
| • |
Flanges according to ISO 7005 PN 16
|
| • |
Outstanding hydraulic performance
|
|
| • |
High efficiency impeller
|
| • |
Closed impeller with back vanes providing axial balancing of impeller loads
|
| • |
Easy maintenance through the Back-Pull-Out principle
|
| • |
Single unbalanced / balanced seals to EN 12756 (DIN 24960)
|
| • |
Single and double cartridge seals with seal support system
|
| • |
Quenched shaft sealing
|
| • |
Gland packing
|
| • |
Atex certification
|
| • |
Dry-shaft design, pumped liquid not in contact with the shaft
|
| • |
Robust shaft design
|
|
| • |
Extended life time
|
|
| • |
2-Deepgroove ball bearings or double row angular contact thrust bearing and cylindrical roller bearing
|
| • |
Grease or oil bath lubricated bearings
|
|
Technical data
|
| Casing: |
Cast iron, Nodular cast iron, Bronze |
Max. liquid temp: |
200°C |
| Impeller: |
Cast iron, Bronze |
Max. pressure: |
16 bar (10 bar) |
| Max. capacity: |
1 500m3/h |
Max. speed: |
3 600 rpm |
| Max. delivery head: |
140 m |
|
|
Downloads (Sales brochure, Data Sheet, Instruction Manual)
For downloadable CAD drawings to assist in planning our pumps into your system go to
Technical info/Dimensional Drawings. |
Back to the Top |
| CombiPro |
| Heavy duty horizontal process pump to API 610, API 682 |
Features
|
| • |
Centre-line mounted end-suction pump overhung single stage process pump
|
• |
Atex certification
|
| • |
Design requirements according to API 610
|
• |
Robust shaft design
|
| • |
Seal chamber to API 682
|
• |
Extended life time
|
| • |
Pump casing and cover metal-to-metal fit with fully fully confined, controlled compression spiral wound gasket
|
• |
2 angular contact thrust bearings and cylindrical roller bearing
|
| • |
Fully integrated design – pump, motor, base plate, and accessories
|
• |
Oil bath lubricated bearings
|
| • |
Outstanding hydraulic performance
|
• |
Bearing housing cooling optional
|
| • |
High efficiency impeller
|
• |
Easy maintenance through the Back-Pull-Out principle
|
| • |
Closed impeller or half open impeller with wear plate and external adjustment
|
• |
Renewable wear rings for casing and impeller
|
| • |
Dynamically balanced impeller
|
• |
Magnetic drive version according to API 685 optional
|
| • |
Flanges according to ISO 7005 PN 50 / 300 lbs ANSI B 16.5
or ISO 7005 PN 20 / 150 lbs ANSI B 16.5
|
• |
Vertical version optional
|
| CombiFlex |
| Vertical centrifugal pump to EN 733 (DIN 24255) |
| Features |
Suitable for
|
| • |
Standardized and modular design
|
Clean, slightly contaminated thin liquids |
| • |
Compact design
|
| • |
Flanges according to ISO 7005 PN 16
|
|
| • |
Many mounting options (floor, bulkhead, wall mounting)
|
| • |
Eight positions possible between suction and delivery connections
|
| • |
Outstanding hydraulic performance
|
| • |
High efficiency impeller
|
| • |
Closed impeller with back vanes providing axial balancing of impeller loads
|
| • |
Spacer-coupling option for easy maintenance
|
| • |
Easy maintenance through the Top-Pull-Out principle
|
| • |
Mechanical seal to EN 12756 (DIN 24960)
|
| • |
Atex certification
|
| • |
Dry-shaft design, pumped liquid not in contact with the shaft
|
| • |
Robust shaft design
|
| • |
Extended life time
|
| • |
2-Angular contact bearing
|
| • |
Bearing bracket option allows a wide range of shaft seals
|
| |
|
|
Technical data
|
| Casing: |
Cast iron, Bronze |
Max. liquid temp: |
200°C |
| Impeller: |
Cast iron, Bronze, Alu-Bronze |
Max. pressure: |
1000 kPa (10 bar) |
| Max. capacity: |
1500 m3/h |
Max. speed: |
3 600 rpm |
| Max. delivery head: |
140 m |
|
|
| Downloads (Sales brochure, Data Sheet, Instruction Manual) |
|
Back to the Top |
| CombiSump |
| A sump pump designed to EN 733 (DIN 24255), ISO 5199 - ISO 2858 / EN 22858, API 610 / API 682 |
| Features |
Suitable for
|
| • |
Standardised and modular design
|
Thin, clean or slightly contaminated liquids as water,
effluent, cleaning products, chemicals, hydrocarbons |
| • |
Customized sump depths up to 10 m
|
| • |
Outstanding hydraulic performance
|
|
| • |
High efficiency impeller
|
| • |
Closed impeller with back vanes providing axial balancing of impeller loads
|
| • |
Half open impeller with wear plate and external adjustment
|
| • |
Oil seal standard shaft sealing. Gas tightening option by mechanical seal or Gland Packing
|
| • |
Discharge flange according to ISO 7005 PN16, PN20, PN50 or ANSI B16.5 150 lbs, 300 lbs
|
| • |
Atex certification
|
| • |
Pumped liquid lubricated silicon carbide radial bearings
|
| • |
External lubrication optional
|
| • |
Heavy duty grease lubricated double row angular contact bearing for axial loads
|
| • |
Standard IEC flange motor
|
| • |
Mounting plate vapor tight or pressurized design
|
| • |
Rectangular or circular mounting plate
|
|
| • |
API 610 / API 682 execution engineered for hydrocarbon and petrochemical processing industries
|
Technical data
|
| Casing: |
Cast iron, Nodular cast iron, Bronze, Stainless steel, Stainless steel alloys, Nickel based alloys, Duplex |
Max. liquid temp: |
160°C |
| Impeller: |
Cast iron, Bronze, Stainless steel, Stainless steel alloys, Nickel based alloys, Duplex |
Max. pressure: |
1600 kPa (16 bar), for API 610 up to 3500 kPa (35 bar) |
| Max. capacity: |
1500 m3/h |
Max. viscosity: |
200 mPas |
| Max. delivery head: |
160 m |
Max. speed: |
3 600 rpm |
| Downloads (Sales brochure, Data Sheet, Instruction Manual) |
|
Back to the Top |
| CombiWell |
| Vertical sump pump to EN 733 |
| Features |
|
Suitable for
|
| • |
Compact standardized and modular design
|
|
Water curtain spray booths (cast iron version) and solvents degreasing spray units (stainless steel version) |
| • |
No shaft sealing
|
| • |
Flanges according to ISO 7005 PN 16
|
|
| • |
For stainless steel execution ISO 7005 PN20/150 lbs ANSI B 16.5 available
|
| • |
Outstanding hydraulic performance
|
| • |
High efficiency impeller
|
| • |
Closed impeller with back vanes providing axial balancing of impeller loads
|
| • |
Liquid lubricated slide bearing
|
| • |
Standard IEC flange motor
|
| • |
Atex certification
|
| |
|
Technical data
|
| Casing: |
Cast iron, Stainless steel |
Max. liquid temp: |
80°C |
| Impeller: |
Cast iron, Stainless steel |
Max. pressure: |
1000 kPa (10 bar) |
| Max. capacity: |
300 m3/h |
Max. speed: |
3 000 rpm |
| Max. delivery head: |
45 m |
|
|
| Downloads (Sales brochure, Data Sheet, Instruction Manual) |
|
Back to the Top |
|
SPX is much more than a Johnson Pump brand manufacturer – We are your solution provider!
|
Multistage Pumps - Johnson Pump brand
  |
|
|
|
| Multistage Pumps |
Single Stage Pumps » |
Magnetic Drive Pumps » |
Hygienic Pumps |
Vertical/Horizontal; MCH, MCV
Self-priming; MCHZ |
Vertical/Horizontal; CombiBloc, CombiChem, CombiDirt, CombiNorm, CombiPro, CombiFlex, CombiSump, CombiWell In-Line; CombiLine, CombiLine Bloc Self-priming;CombiPrime, FreFlow, KGE
|
Heavy duty; CombiMag, CombiMagBloc
Non metallic; MDR |
Contact your local sales representative for advice
|
|
Multistage Centrifugal Pumps
The range of multistage pumps includes a series of horizontal pump, MCH, and a range of vertical pump, MCV.
The horizontal types can also be supplied in a self-priming version, MCHZ.
|
| Features |
| • |
Rigid, reliable construction |
|
 |
| • |
High pump efficiency |
|
| • |
Low maintenance cost |
|
| • |
Mechanical seal or gland packing
|
|
| • |
Atex Certification
|
|
| |
|
|
Technical data, general
|
Details: |
Liquid temp. |
Pumptype |
Shaft seal |
| Casing: |
Cast iron, Bronze - only the MCH-versions |
|
-15 to +105°C |
MCH, MCV, MCHZ |
stuffing box |
| Impeller: |
Cast iron, Bronze |
|
-15 to +150°C |
MCHW |
water-cooled stuffing box |
| Max. capacity: |
100 m3/h |
|
-20 to +120°C |
MCHS, MCVS, MCHZS |
mechanical seal |
| Max. delivery head: |
340 m |
|
| Max. operating pressure: |
4000 kPa (40 bar) |
|
| Max. speed: |
3 600 rpm |
|
| |
|
|
| Downloads (Sales brochure, Data Sheet, Instruction Manual) |
|
|
SPX is much more than a Johnson Pump brand manufacturer – We are your solution provider!
|
Hygienic Pumps
 |
|
|
|
Hygienic Pumps
|
Magnetic Drive Pumps |
Multistage Pumps |
Single Stage Pumps |
|
Please contact your local sales representative for advice »
|
Heavy duty; CombiMag, CombiMagBloc
Non metallic; MDR |
Vertical/Horizontal;
MCH, MCV
Self-priming; MCHZ |
Vertical/Horizontal; CombiBloc, CombiChem, CombiDirt, CombiNorm, CombiPro, CombiFlex, CombiSump, CombiWell In-Line; CombiLine, CombiLine Bloc Self-priming;CombiPrime, FreFlow, KGE
|
|
The SPX Flow Technology sales force can assist you to find hygienic centrifugal pumps from APV.
The APV centrifugal pump range comprises the following models:
• For maximum operating benefits and minimal life cycle costs W+ pumps »
• For reliability in standard duty applications Puma+ pumps »
• Basic low-specification model V2 pumps »
Links to product pages on www.apv.com
|
TopFilter - Johnson Pump brand
Giving pumps protection from unwanted debris in the pumped media ensures smooth operation and reduces the possibility of damage and subsequent costly downtime. Such protection can now be achieved using Johnson Pump’s TopFilter range of filtration products.
 |
 |
 |
| Single Filter TFOV |
Single Filter Multibasket TFOVM |
Dual Filter TFOW |
| Single filter 20 mm (¾")–150 mm (6") |
Single filter 200 mm (8")–250 mm (10") |
Dual filter 20 mm (¾")–200 mm (8") |
Johnson Pump, an SPX Brand, introduces pump filter range TopFilter
|
| TopFilters are available in two ranges, four material options and eleven separate sizes offering filtration levels down to 5 microns. The TopFilter provides the pump user with an effective yet simple method of removing debris before it can affect pump performance. Suitable for fitting to either the suction or discharge side of the pump, TopFilters can be supplied by Johnson Pump as an integral part of the pump or as a stand-alone item. |
|
The filters are available in single and dual filter models. The single filter, TFOV, contains a single chamber which remains on-line. When the basket within the filter requires cleaning the process line will need to be isolated in order for the filter basket to be removed. The dual filter, TFOW, has two chambers (only one is used at a time) and remains on-line. However, when the filter basket requires cleaning the liquid flow is diverted by handle to the second chamber. The basket can then be removed whilst the process line remains in use. The benefit of this is that there is no downtime. |
| Read more in the press release; Johnson Pump, an SPX Brand, introduces pump filter range |
| TopFilter TFOV - Single filter 20 mm (¾")–150 mm (6") |
 |
|
TopFilter TFOV provides a cost-effective method of protecting pipeline equipment, cleaning liquids or salvaging valuable solids. Incorporated are a number of special features and optional extras. The filter is of cast construction and is supplied with one high quality stainless steel cylindrical basket. It is used in liquid handling installations where the flow can be shut off for short periods to allow the removal of the basket for cleaning.
| Main Features |
Options |
| • |
High quality 316 grade stainless steel basket with large filtration areas resulting in low pressure drops |
• |
Range of extras allowing filter to be customised |
| • |
Working pressures up to 50 bar (A300 Series) |
• |
Available in cast iron, cast steel, gunmetal (bronze) or stainless steel |
| • |
Quick release filter covers and knobs for easy maintenance |
• |
Visual/Electrical differential pressure indicators are available |
| • |
Compact design for space saving |
• |
Magnetic columns (pre-magnetic filtration) |
|
Downloads (Sales brochure, Instruction Manual)
|
Back to the Top
|
| TopFilter TFOVM - Single filter 200 mm (8")–250 mm (10") |
 |
|
The TopFilter Multibasket extends the range of Single Filters, specially designed to be compact and easily maintained, with basket removal easier compared to other units with similar pipe size connections.
The filter is of cast construction and is supplied with four or five high quality stainless steel cylindrical baskets depending upon the size. For use in liquid handling installations where flow can be interrupted to allow the removal of baskets for cleaning.
| Main Features |
Options |
| • |
High quality stainless steel baskets with large filtration areas resulting in low pressure drops |
• |
Range of extras allowing filter to be customised |
| • |
Working pressures up to 13.8 bar |
• |
Available in cast iron, cast steel, gunmetal (bronze) or stainless steel |
| • |
Quick release filter covers and knobs for easy basket removal |
• |
Differential pressure indicators are available |
| • |
Compact design for space saving |
|
|
|
Downloads (Sales brochure, Instruction Manual)
|
Back to the Top
|
| TopFilter TFOW - Dual filter 20 mm (¾")–200 mm (8") |
 |
|
For applications where the requirement is for continuous flow with minimum loss of pressure, the TopFilter TFOW provides quality of design and performance.
The filter is of cast construction and incorporates two chambers each containing a high quality stainless steel basket. Flow is diverted from one basket to the other without interruption by turning the handle, which rotates dual cylindrical cocks, delivering the flow to the appropriate chamber.
| Main Features |
|
| • |
Simple changeover operation requires infrequent maintenance |
• |
No contamination between filtered and unfiltered liquids |
| • |
Working pressures up to 50 bar, A300 Series |
• |
Wide range of materials, sizes and accessories |
| • |
Quick release filter covers and knobs for easy maintenance |
• |
Filtration down to 10 microns |
| • |
Compact design for space saving |
• |
Handle covers chamber in use — preventing accidental opening of pressurised chamber |
| • |
Large filtration areas giving low-pressure drops |
|
Differential pressure indicators as optional extras |
|
Downloads (Sales brochure, Instruction Manual)
|
Back to the Top
|
|
SPX is much more than a Johnson Pump brand manufacturer – We are your solution
|
|
