德国NEIDLEIN机床专用顶尖
产品系列:
SB/FSB
With sprung centre
|
Mechanical clamping system with
compensating drive pins |
|
With guaranteed datum point at face of workpiece,
thus maintaining linear measures |
|
Minimal centre runout due to extended guide length on centre |
|
Clamping force is transmitted by the tailstock |
|
The centre point is mechanically locked when in the clamped position |
|
Accurate within 0.01 to 0.02 mm TIR |
|
High driving torque |
|
Extended service life of the centre and drive pins
due to its rigid construction |
|
Driving diameters from 6 to 360 mm |
|
Work pieces up to 800 mm in diameter
and 10000 kgs in weight |
|
User friendly |
随着弹簧中心
机械夹紧系统
驱动引脚补偿
有保证工件在面对基准点,
从而保持线性措施
由于最小跳动中心在中心指导长度延长
锁模力是经由尾座
中心点是机械锁定时,在夹紧位置
精确到0.02毫米在0.01国际公路运输
高驱动力矩
延长了服务中心和生活驱动引脚
由于其严格的建设
驾驶直径6至三百六十〇毫米
工件达800毫米,直径
重量10000公斤
用户友好
FFB
Power operated with fixed centre
|
Mechanical clamping system and zero runout
centre for maximum workpiece support |
|
Fixed centre point |
|
Accurate within 0.002 to 0.005 mm TIR |
|
High driving torque |
|
Clamping force via actuating cylinder and tailstock |
|
Extended service life of the centre and drive pins
due to its rigid construction |
|
Driving diameters from 6 to 170 mm |
|
Work pieces up to 350 mm in diameter
and 2000 kgs in weight |
机械夹紧系统和零跳动
******工件支持中心
固定中心点
0.002精确到0.005毫米内公路运输
高驱动力矩
夹紧缸和尾座通过驱动力
延长了服务中心和生活驱动引脚
由于其严格的建设
驾驶直径从6至170毫米
工件达350毫米,直径
和2000公斤的重量
FDNC
FDNC Face Driver for Clamping when
milling or gear hobbing
|
Mechanical clamping system with fixed nose cone |
|
Spring born centre pin |
|
Spring force adjustable |
|
Nose cone with centre pin, runout adjustable |
|
Individual construction of retain flange |
|
Easy to handle |
|
Radial play |
机械夹紧系统固定鼻锥
中心销
可调弹簧力
鼻锥的中心销,跳动可调
个别保留法兰
易操作
径向游隙
Mounting flange with
Micro adjustment
|
Safe, reliable and fast mounting options or face drivers |
|
For machine spindles DIN 55021 (55026)
and DIN 55022 (55027) |
|
For all chuck manufactures |
|
Also available hardened universal spindle
data sheet flange adapter data sheet |
安装法兰
微调
安全,可靠和快速的安装选择,否则将面临司机
对于机床主轴符合DIN 55021(55026)
和DIN 55022(55027)
对于所有夹头制造
也可用硬万向轴
数据表数据表法兰适配器
|