A wide line of high voltage power supplies for laboratory, development and production use.
It includes front panel operation with 10 turn potentiometers, digital indications of output voltage and current as well as remote programming operation possibility.
As a standard feature the output voltage and current as well as monitoring output voltage and currrent can be set/read via an analog signal of 0-10VDC.
Optionally a GP-IB/IEEE488 or RS232 interface is available.
All models are available either with adjustable trip level for current or adjustable constant current mode. A protection against overload, short circuit and arc is included as a standard safety ciruit.

 

 

• 350 W units with mains input wide range and PFC.
• 10" compact box.
• Extraordinary control characteristics for output voltage and current.
• Patented resonance mode technique, low EMI.
• Very high efficiency, up to 85%.
• GPS/KPS:
  - remote control via analog I/O
• HPS/LPS:
  - manual front panel operation
  - 4 digit voltage and current displays
  - remote monitoring and control via CAN and RS-232 interface
  - optional Ethernet interface
• KPS/LPS:
  - Capacitor charger with high repetition accuracy at high charging frequencies

 

 

 

 

 

 

• 1,5 kW / 3 kW units with single-phase wide range AC input and PFC
• 10 kW units with three-phase AC input
• Standard 19", 2U, 3U, 4U housing
• Excellent control characteristics for output voltage and current
• Patented resonance mode technique, low EMI
• Very high efficiency, up to 93%
• Remote control via isolated analog I/O or USB interface
• Adjustable ARC management
• Interlock safety loop and inhibit function
• Optional:
  - manual front panel operation
  - 4 digit voltage and current displays
  - remote control via CAN, RS-232, IEEE 488.2 and Ethernet interface
  - 24V interface (PLC), separation of analog and digital output signals
• LPS series: Capacitor charger with high repetition accuracy at high charging frequencies

 

 

The SHQ family is a series of high precision HV desktop power supplies. It offers extraordinary specifications concerning stability and precision of the output voltage.

• Single channel version and two channel version available.
• Current resolution 1 nA, opt. 100 pA.
• Voltage resolution 100 mV, up to 4 kV opt. 10 mV.
• Constant, precise voltage, low ripple and noise.
• Switchable polarity.
• Test instrument e.g. for HV cable.
• Full remote control via RS232 or CAN interface (IEEE interface is in preparation).

Inxpensive and robust desktop high voltage power supplies with 1 or 2 channels. Equipped with 1 or 2 CPS, DPS or EPS HV modules in many combinations.

• High precision output voltage with very low ripple and noise.
• Free configurable.
• LED display for voltage or current, switchable.
• Voltage setting via 10 turn potentiometer or analogue I/O (set voltage and monitor voltage 0 to 5 V) on D Sub 9 connector on the rear.

High voltage chassis mountable regulated power supply module.
120W through 350W models, all common line voltages.
Remote programming and monitoring. Constant voltage / constant current modes.
Protected against: overvoltage, overcurrent, overtemperature, short circuit and arc.
Typical applications are: CRT testing, X-ray tube, capacitor charging, electron beams, ion implantation, insulator testing and all kinds of high voltage testing.

Compact module for grounded cathode X-ray tubes.
It incorporates adjustable beam, bias and filament supplies for low power X-ray applications.
High voltage and filament current ramp up linearly for fast starts. Constant emission current is adjustable from 0 to full output for precise emission control.

AMP series is an ultra high speed high voltage amplifier.
It realized as fast as 700 V/µs even with load, and approximately 2 times faster than existing models. Ideal for higher speed printer or material evaluation testing.
With the capability of peak current output of 3 times. it suppress the distortion of waveform when with capacitive load. Ideal amplifier for E-chuck or material testing of larger glass slate or for Beam scanning with air capacitance.

AMS / AMT series is a rack-mountable type, fast response high voltage amplifier. It gives quick response as fast as 100kHz and provides high voltage outputs in reference to its input wave forms such as sine, triangle, saw tooth, and square wave forms.
All models include a bias function and 3.5 digit indicator for DC-output voltage. The two series differ in frequency response time and maximum output power. 13 different models are available as standard units. Output voltages range from ±600V to ±20kV.

This series is a series of fast response high voltage solid state operational amplifier chassis mountable modules. It provides quick response up to 12kHz. With its small design it can be incorporated into your housing. The two series differ in frequency response.

The precision high voltage amplifier HA05B2 is a standard 19" plug-in unit of 3HU / 6HP. The output voltage is -500V to +500V at load current of ±2mA. The control voltage ranges from -10V to +10V and the gain is 50.
The amplifier features high precision, very high stability and low noise, thereby making the unit well suited even for voltage reference applications.
The output voltage is controlled by a control voltage which can be either provided via its nominal value input or set by a 10-turn potentiometer. Monitor outputs for voltage and current are provided. Furthermore, the unit is equipped with a fast inhibit input effectively clamping the output voltage to 0V.
The output is protected against overload, short circuit and transient overvoltage.
High-Speed versions up to 15kHz bandwidth / 50V/µs slew rate are available on request.
The output connectors are alternatively BNC connectors (HAR12 mainframe) or SHV connectors (HAR12S mainframe).

The precision high voltage amplifier HAR12A is a 19" rack-mountable unit of 3HU.
Twelve channels provide output voltages in the range of -500V to +500V at load current of ±2mA each.
Each output voltage is controlled by a control voltage which can be either provided via its nominal value input or set by a 10-turn potentiometer. The control voltage ranges from -10V to +10V and the gain is 50.
Monitor outputs for voltage and current are provided on each channel.
Furthermore, each channel is equipped with a fast inhibit input effectively clamping the output voltage to 0V.
The amplifier channels feature high precision, very high stability and low noise, thereby making the HAR12A well suited even for voltage reference applications.
Both the output voltage and the load current of each channel can be displayed simultaneously on two 4-digit red LED-displays. A rotary switch for channel selecting is provided.
All amplifier outputs are protected against overload, short circuit and transient overvoltage.
High-Speed versions up to 15kHz bandwidth / 50V/µs slew rate are available on request.

A 4 channel fast response high voltage amplifier for rack mounting. It provides high voltage outputs in reference to its input wave forms such as sine, triangle, saw tooth and square wave forms. It includes DC bias function adjustable with a 10-turn potentiometer as well as monitor outputs and remote ON/OFF. The output voltages can be read at four displays at the front of the instrument.

These high efficient switched mode power supplies are designed to fulfil the requirements of industry, production test application, research and development. Due to the zero voltage switching technology transients and noise are reduced. Inserting an optional GPIB/IEEE488 or RS232 interface card it can be controlled by an external computer for remote control. For manual operation a 10-turn potentiometer and a 3-digit indicator each for voltage and current are inserted at the front. All units are small, lightweight and optimised for high efficiency and low heat generation.

The GEN750 / GEN1500 programmable switching power supply offers up to 1500W output power in a standard 19"/1U housing.
It is the first in an advanced, high-density series of AC/DC, rackmount power supplies.
Outputs available range up to 600V and 200A.
In addition to saving space, GEN750 / GEN1500 power supplies contain extensive standard features that provide a new level of performance and flexibility in ATE, Industrial and Communications applications.

The GEN2400 family of programmable power supplies has the highest power density ever offered in 1U size.
Features include: high power density 2.4kW in 1U, wide range of popular worldwide AC inputs, 1ø (230VAC) & 3ø (208VAC), active PFC (single-phase & three-phase AC input), output voltage up to 600V, current up to 300A, built-in RS-232/RS-485 interface, last-setting memory, high resolution 16 bit ADCs & DACs, low ripple & noise.

The GEN3300 family of programmable power supplies sets a new standard for flexible, reliable, AC/DC power systems in OEM, industrial and laboratory applications.
Wide range input (1ø (230VAC) & 3ø (208VAC, 400VAC).
Active Power Factor Correction (Single-Phase & Three-Phase AC Input).
Output Voltage up to 600V, Current up to 400A.
Built-in RS-232/RS-485 Interface Standard, optional GPIB.
Global Commands for Serial RS-232/RS-485 Interface

Programmable power supplies in 19″-housing of 3U delivering up to 15kW
for AC/DC power systems in OEM, industrial and laboratory applications.
Output Voltage up to 600V, Current up to 1000A.
Built-in RS-232/RS-485 Interface, optional GPIB, LAN, Analog, Multi-Drop, USB.
Up to four units may be connected in parallel and appear as a single 60kW power supply.
Up to two units may be connected in series.
Multi-Drop option allows an IEEE Multi-Drop Master to control Multi-Drop equipped Slaves over RS-485

Programmable power supplies in 19″-housing of 3U delivering up to 15kW
for AC/DC power systems in OEM, industrial and laboratory applications.
Output Voltage up to 600V, Current up to 1000A.
Built-in RS-232/RS-485 Interface, optional GPIB, LAN, Analog, Multi-Drop, USB.
Up to four units may be connected in parallel and appear as a single 60kW power supply.
Up to two units may be connected in series.
Multi-Drop option allows an IEEE Multi-Drop Master to control Multi-Drop equipped Slaves over RS-485.

The GENH family of programmable power supplies sets a new standard for flexible, reliable, AC/DC power systems in OEM, industrial and laboratory applications.
Highest power density available: 780W in a 1U half-rack size. Wide range input (85 - 265V_AC continuous).
Active Power Factor Correction (0.99 typical).
Output voltage up to 600V, current up to 100A.
Built-in RS-232/RS-485 interface, optional GPIB.
Last-setting memory, high resolution 16 bit ADCs & DACs, reliable encoders for voltage and current adjustment.
Constant Voltage/Constant Current auto-crossover.
Parallel operation with active current sharing. Independent remote ON/OFF and remote enable/disable.
External analog programming and monitoring.

The new modular JUST POWER! - series provides 12kW, 18kW, 24kW, 30kW and 40kW of programmable DC power in smallest chassis.
This is the highest power density product available for a programmable DC power supply in this power range. The JUST POWER! modules use the state-of-the-art switching technology that minimizes switching transients and contributes to the high efficiency, low noise and high reliability of this product. It is also power factor corrected for low current draw and reduced generation of input current harmonics.

The laboratory power supplies offer an adjustable and well stabilised output with very low ripple at a wide input range. As laboratory stand alone instrument or inserted in a 19" rack the output connectors are at the rear side or at the front. Manual operation and display of current and voltage at the front and interface RS232 or an analog input are standard for remote control. Optionally a GPIB-controller is available.