WME Power Systems GmbH电源 测试设备 电位计
德国WME Power Systems GmbH电源 测试设备电位计
产品系列:
Test Equipment
Digital Power Meter 66200 Series
- Voltage Range : 150/300/500 VRMS
- Current Range :
Model 66201 - 0.01/0.1/0.4/2 ARMS
Model 66202 - 0.01/0.1/0.4/2 ARMS
0.2/2/8/20 ARMS
- Frequency Range : DC, 15 Hz … 10 kHz
- Embedded high speed DSP, 16 bits Analog/Digital converters
- 10 mA minimum current range, 1 mW power resolution
- Meets ENERGY STAR / IEC 62301 measurement requirements
- Accumulated energy methods for unstable power measurement
- User-defined criteria provide automatic PASS/FAIL indications
- Half rack width and 2U height, suitable for system integration
- Dual current shunt design provides high accuracy over a wide
current range (Model 66202)
- THD and user-specify order distortion measurement (Model 66202)
- Inrush current and energy measurement (Model 66202)
- Interface options : USB or USB+GPIB
- Voltage/ Current harmonics measurement up to 50 orders
LCR Meter 11021
- Test frequencies 100 Hz, 120 Hz, 1 kHz and 10 kHz (9.6 kHz)
- Measurement basic accuracy 0,1%
- Measurement range 0.1 mΩ … 99.99 MΩ, resolution 4½ digits
- High measurement rate
- Standard RS232 interface
- Optional GPIB & Handler interface
- Comparator and Pass/Fail alarming beeper function
- Online firmware update (via RS232)
- Text mode 40x4 matrix LCD display
- Friendly user interface
LCR Meter 11022/11025
- Test frequencies: 100 Hz, 120 Hz, 1 kHz, 10 kHz, 20 kHz, 50 kHz, 100 kHz
- Test signal from 10 mV to 1.0 VRMS programmable
- Internal DC bias current source 200 mA maximum
- Measurement basic accuracy 0.1%
- High resolution (0.01 mΩ) for low impedance component measurement
- 15 ms measurement time in all frequency ranges
- Test signal level monitor VM/IM function
- Transformer test parameters measurement capability (11025 only)
- 240x64 Graphics LCD display and easy operation
Milliohm Meter 16502
- 0.001 mΩ … 1.9999 MΩ
- Basic accuracy: 0,05%
- Pulsed test current output mode to reduce thermal EMFs affection on milliohm measurement
- Dry-Circuit test current output mode
- Measurement range with 4½ digits resolution
- Comparator and Pass/Fail alarming beeper function
- RS232- Interface, Option: GPIB and Handler interface
HiPot & Safety Tester
Main application fields of the HiPot Safety Tester are AC/ DC/ IR hipot tests for electronic components, ground bond- and leakage current tests at electric and medical devices.
Further usage is for UL, CE, TüV conformity tests.
Safety Analyzer / HiPot Tester |
19032 |
19050 |
19071 |
19073 |
19572 |
Voltage Test - Output AC |
0.05~5 kV |
0.05~5 kV |
0.05~5 kV |
0.05~5 kV |
- |
Voltage Test - Output DC |
0.05~6 kV |
0.05~6 kV |
- |
0.05~6 kV |
- |
Isolation Resistance Test Output Voltage |
DC:
0.05~1 kV |
DC:
0.05~1 kV |
- |
DC:
0.05~1 kV |
- |
Ground Resistance Test Output Current |
AC:
3~30 A |
- |
- |
- |
AC:
3~45 A |
Electrical Safety Analyser 19032/19032-P
- Floating Output Design meet EN50191 (19032-P)
- 500VA Power Rating (19032-P)
- Five instruments in one: AC Hipot, DC Hipot, Insulation Resistance, Ground Bond and Leakage Current (Option)
- Programmable output voltage to 5kV AC and 6kV DC
- Insulation resistance to 50GΩ/1000V DC
- Ground bond up to 30A (Option up to 40A / 60A)
- Open/Short check(OSC)
- ARC detection (Flashover)
- Password Protected front panel lockout
- Storage of 50 Tests Setups with 100 Steps per setup
- Optional dynamic leakage current auto scanning (A190305/A190306/A190307/A190308)
- Standard RS-232 Interface
- Standard GB OFFSET KIT, SCANNER Interface
- Optional GPIB Interface
HiPot Tester 19050 Series
- 3 in 1 Tester : AC, DC, IR
- Programmable output voltage to 5kV AC and 6kV DC
- Trip current programmable to 30mA AC and 10mA DC
- Insulation resistance to 50GΩ/1000V DC
- Built-in 8 channel SCANNER (19053 only)
- Built-in 4 channel SCANNER (19054 only)
- Open/Short Check (OSC)
- Ground Continuity Check
- ARC detection (Flashover)
- Storage of 50 Tests Setups with 100 Steps per setup
- Fast cutoff time: 0.4 ms, fast discharge time: 0.2 sec
- Standard RS-232 Interface
- Optional GPIB Interface
HiPot Tester 19070 Series
- Compact size Hipot tester
- Three instruments in one: AC Hipot, DC Hipot, Insulation Resistance (19073)
- Open/Short Check (OSC)
- ARC detection (Flashover)
- Fast cut-off: 0.4 ms, fast discharge: within 0.2 sec
- Provide reliable and stable test results
- Storage of 10 Tests Setups with 60 Steps per setup
- Ground Fault Interrupt (GFI)
Ground Bond Tester 19572
- Wide resistance measurement range : 0.1 ~ 510 mΩ
- High performance AC current output : 45 A
- Compact size ground bond tester
- Provide reliable and stable test results
- Built-in resistance compensation function
- Standard RS-232 interface
- Optional GPIB Interface
- Compatible with the model 19070 series Hipot Tester
Power Amplifiers / Magnet Power Supplies
PA120A
- High-Speed High-Precision Power Amplifier
- Power-bandwidth DC - 1.5 MHz
- ± 30 VP / 10 AP / 4 ADC
- Slew-Rate 250 V/µs
- 2 summing input-channels
- C-load mode
- DC-offset < 3 mV
- Monitor Output
- Sophisticated protection and limiting concept
- Complete protection against overload, overtemperature and short circuit
PA02-R
- 4 Channel Power Amplifier
- 40 W / 200 VRMS / 0.2 ARMS per channel
- Power-bandwidth 45 Hz - 1000 Hz
- Small-signal-bandwidth 5 Hz - 10 kHz
- Monitor outputs for output current
- Complete protection against overload, overtemperature and short circuit
- Can be used as 4-phase AC source
PA2540
- Very High Precision Power Amplifier
- Current-Mode Control
- Very low drift / very low noise
- Stability: < 1x 10-4
- Slew-Rate control
- Precision monitoring outputs
- Complete protection against overload, overtemperature and short-circuit
- Safety-Interlock Inputs
Custom Power Solutions
AC/DC Power Supplies
OEM Power Supplies
Our affiliate company WME Power Systems GmbH specializes in custom solutions of power supplies, power electronics and high voltage since 1982.
Products developed and manufactured by WME are used all over the world, e.g. in medical, industrial or scientific applications.
Please use our Inquiry form to submit your individual request for a custom power solution.
HWS series
Output 3.3V to 60V / 15W to 1800W
Compact power supplies for industrial loads, including factory automation, burn-in, test and measurement environments and process control.
The HWS series is available in power levels from 15W to 1500W. Universal input with PFC.
Output voltages ranging from 3.3V to 60V. Option: programmable output voltage. Parallel operation (up to 5 units) for models from 300W up.
Medical approved models, high peak power models and heavy duty models available.
The HWS series power supplies feature solid metal covers and screw terminals.
DPS400 series
dps400_manual.pdf
dps404a_manual.pdf
Output 24V to 100V / 400W
All these power supplies for drive technology combine a powerful DC-output with peak current up to 6 times. A ballast resistor for motor braking deceleration is included. The DPS404A type has an integrated auxiliary supply 24V / 0.4A in place of the ballast resistor.
The power supplies are build in a robust metal housing for wall mounting and do not need an integrated fan. Different output voltages to suit the specific demands are available.
JWS / JWT series
Output 2V to 48V / 33W to 648W
Ideal for industrial loads, including motors, burn-in, and test and measurement environments, as well as PLC controls in automotive applications, the JWS series is available in power levels from 33W to 648W, with universal input and output voltages ranging from 2V to 48V.
The JWS and JWT power supplies can be supplied with optional covers for safety protection and an optional DIN rail mounting kit.
High Voltage Cable / Connectors / Accessories
High Voltage Cable
up to 300kV
Standard high voltage cables for operating voltage up to 300kVdc, shielded and unshielded, diverse dielectric materials, e.g. silicone, EPR or PE.
High Voltage Connectors
up to 100kV
The single pole high voltage pairs HSx1 and HBx1 are available for operating voltages of 10kVdc, 20kVdc and 30kVdc.
Series 100 connectors are available for up to 100kVdc.
A shielded cable can be easily fitted to the plugs for an interconnection wire. The strong nickel-plated housing and the screw interlock warrant a safe and reliable connection.
High Voltage Divider V1G
1000:1, 1-25kV
- High Voltage Divider 1000:1 into 10MΩ
- Voltage Range 1000V - 25kV
- Input Resistance 1000MΩ
Fiber Optic Interfaces
F422-G
An interface module to convert the electrical signal of RS-422-B for an interference free data transmission via optical fibers.
The possible link distance exceeds 500m when using 200μm glass fiber cable and 75m when using 1mm plastic fiber cable.
For RS-422-B a 8 way RJ45 connector is used and the external power supply has a 4 way RJ11 connector.
The F422-G can be configured using internal jumpers, eg. as DCE or DTE device.
LIMO-G
An interface module to convert the electrical signal of RS232-C (V24) for an interference free data transmission via optical fibers.
The possible link distance exceeds 500m when using 200μm glass fiber cable and 75m when using 1mm plastic fiber cable.
With its low power consumption the 25-pole connector can be plugged directly into a DCE or DTE connector without an external supply.
According to the specific requirements the LIMO-G is configured using internal jumpers.
For a 9-pole connector an adapter is available.
UN Series
Fiber optic connectors for serial, asynchronous and full duplex data transfer are available for 9-pole socket connector layout.
An external power supply is not essential.
Using these connectors at both ends, you can assembly a low cost and reliable link without special tools.
|