|
WATTDRIVE Antriebstechnik齿轮箱和减速电机 驱动器
德国WATTDRIVE Antriebstechnik齿轮箱和减速电机驱动器
产品系列：
|
WATT MAS
Modular Drive System MAS:
Watt Drive offers a complete program of electric, electronic and mechanical drive technology both in the form of individual units or as a complete drive system.
We offer perfectly coordinated standard products!
By expanding on top of our modular gear system we are able to meet the highest demands of our customers with the most modern motor and inverter technologies. Our special tooth formation and surface finish guarantee the highest bearing capacity resulting in smaller gear wheels at the same torque. In this manner smaller gear units are possible with an excellent power spectrum.Watt Drive geared motors really are spectacular!
The modular drive system MAS constitutes:
?Drive System
from Watt Brain Power, gear units, motors and
electonic drives
?Modular Drive Electronics
with frequency inverters for open loop, sensorless vector,
closed loop, torque and position control as well as various
bus systems.
?Modular Motor Systems
including system motors and servomotors based on
modular design concepts that can be simply tuned to meet
the needs of the customer.
?Modular Gear System
in particular for servo drive systems, low backlash, quiet,
compact
We realize our customers?individual requests!
The innovative Watt gear and motor systems enable individual customer solutions at the highest quality that are quickly available.
You receive a one-stop drive system solution that meets all the demands required of drive technology.
A wide range of services, competent advice, engineering, project scheduling, project management, setting up operations and support complete our extensive offerings.
|
| Electronic product catalogue - cat4CAD |
| Order catalogue |
|
|
Mechatronic
Watt Mechatronis - Geared motor systems:
Mechatronics (a thought-up word taken from mechanics and electronics) stands for the technical connection between the disciplines of electro-technics, electronics, informatics, engineering, drive technology and construction and can be applied wherever an intelligent link can be made between these areas resulting in an increase in the overall functionality of a product, or if costs can be optimised.
Watt Drive implements these links to the individual disciplines in the new software "cat4CAD 4.0", where perfectly coordinated components from the Watt portfolio are combined together to form a reliable system.
For further information please see our e-news >> e-news cat4CAD 4.0" or under the section: cat4CAD.
|
Gear units and geared motors
Geared motors of the highest quality
Watt Drive gear units and geared motors are based on the WATT MAS Gear and Motor Sytems and encompass
- Helical-,
- Shaft mounted-,
- Parallel shaft-,
- Helical worm-,
- Helical bevel- and
- Angle parallel shaft gears (geared motors)
in foot, flange, uniblock or shaft-mounted gears with full or hollow shaft.
Using the WATT MAS gear and motor system, it is possible to implement reliable and economical solutions in a very short time that are customized to your particular call for use.
The characteristics of modular Watt Drive gear technology meet all the criteria of the most modern drive systems:
?Outstanding power spectrum
?Minimal back lash
?Excellent running
?Smoothness
?Diverse mounting possibilities
?Maximum operational safety
?High variability
?Customer-oriented torque / overall size
|
| Electronic product catalogue - cat4CAD |
| Order catalogue |
| MAS - Gear unit and geared motor catalogue - MAS 10 |
|
|
EUSAS-System motors
A Motor for 100Hz Characteristic and Any Voltage Worldwide !
WATT EUSAS motors are top quality three-phase AC industrial models from Watt Drive抯 customer-oriented modular WATT MAS motor system.
EUSAS stands for EUROPA - USA - ASIEN and means that the wide voltage range and simple voltage selector in the terminal box enable the motor to be operated with virtually any supply voltage and frequency worldwide.
Connection types:
All world voltages are possible in the range from 3x190-210V (DD), 330-365V (YY), 380-420V (D) and 660-690V (Y) for 50 and 60Hz.
The board with nine terminals enables star (Y), delta (D), double star (YY) and double delta (DD) connection of the Watt Drive motor.
|
Drive Electronics
The frequency inverter programs S-line, B-line, E-line and P-line consistently follow the same principle in the range of 0.2 to 90 kW as the Watt Drive modular drive systems.
These frequency inverters distinguish themselves through their excellent control features, compact size, ease of use and very good communication skills.
The differences between the four programs lie primarily in the control features and thus the starting torque and dynamic performance achieved.
The S models are V/F controlled, while the B, E and P range consists of vector-controlled frequency inverters.
The E-line offers implemented EMC filters and brake choppers in series, as well as many possible extensions for the digital and analog in- and outputs. Moreover an integrated SPS control is available.
The P range features distributed intelligence e.g. for positioning tasks. This complete range of modular drive control units offers the technically best and most cost-effective drive solution for any requirement, from simple open loop control to top dynamic closed loop process control and positioning applications.
Watt Drive is able to offer a complete range of modular drive control units and the most cost-effective drive solution for any requirement, from simple control and drive tasks to the control of top dynamic processes and positioning.
S-line VFD-S
Performance area: 0.25kW - 2.2kW [1/3HP up to 3HP]
B-line VFD-B
Performance area: 0.75kW - 75kW [1HP up to 100HP]
E-line VFD-E
Performance area: 0,75kW - 22kW [1HP up to 30HP]
P-line P6000
Performance area: 0.75kW - 90kW [1HP up to 120HP]
|
| Manuals |
| Programming software |
| Frequency inverter flyer |
|
|
Explosion-protected drives
Watt Drive gear units observe the 94/9EG (ATEX 95) directives.
In accordance with the new directive, the explosion-protection norm has been extended to include non-electrical operating resources.
Requirements have been set up to regulate the provision or use of devices and protection systems for their intended use in explosive areas.
Watt Drive gear units fulfil these requirements for operating resources and thus ensure reliable line operations when put to use in explosive areas.
Gear units in line with ATEX can be used for gas (G) as well as for dust explosion control (D).
ATEX approval has been given for the following explosive areas:
Equipment group I category M2: I M2 c
Equipment group II category 2: II 2G c T4
II 2D c 120癈
Equipment group II category 3: II 3G T4
II 3D 120癈
The gear unit, in accordance with ATEX, adheres to the highest quality standards:
?Gear units are equipped with an impact-safe protection
cap for hollow shaft or shrink disc version
?Screws are protected against coming loose
?Own ATEX - nameplate
?Oils with a higher temperature resistance are used
?Ventilation of the gear unit is executed via a special
high pressure ventilation valve
For further information please see our Newsletter "WATT gear units confirming to the EU - guideline 94/9/EC (ATEX 95)".
See in Newsletter archive column "other".
|
|
|
Agitator drives
Agitator and extruder drives - reliability that meets the highest demands.
The agitaor drives of the Watt Drive company are part of the modular gear system in the MAS program.
Aim of development was maximum sealing protection and a long storage product life while at the same time providing extremely reliable radial and/or axial power.
What resulted from these guidelines were gear units that alongside these requirements offer these further optional features:
?Rust-protected brakes
?Greater corrosion protection (special coating for
increased atmospheric conditions)
?A variety of motor options (auxiliary heating system, ?
?Niro nameplates
?Oil inspection glass
?If necessary, special lubricant
?High pressure ventilation valve
?Oil level sensor
?...
The agitator drives are available in the following models:
? Shaft mounted geared motors AR.
Power: 0.12 - 18.5kW
Torque: 400 - 1,500Nm
? Parallel shaft geared motors FR.
Power: 0.18 - 55kW
Torque: 2,800 - 14,000Nm
? Helical bevel geared motors KR.
Power: 0.12 - 55kW
Torque: 1,000 - 14,000Nm
The gear units are available with hollow shafts, hollow shaft with shrink disc and output shaft.
For further information please see our Newsletter "Agitator-, Extruder drive - reliability for highest demands".
See in Newsletter-archiv, column "Product news (mechanical)".
See in Newsletter archive column "Product news (mechanical)".
|
Special solutions
If you are looking for a complete drive system or single components that cannot be implemented from a standard model, then we are the right people to contact.
Our product range can be customized by our application engineers to suit your requirements.
The already described special drive units were developed according to customer requirements. Increased customer use while observing the highest quality standards has top priority.
Our drive unit solutions are in operation in almost all four corners of the world and receive acclaim due to their high reliability and long product life.
|
 |
|
Gear units up to 120 kNm
Innovative total solutions up to 120 kNm.
All-inclusive project solutions from systems suppliers are valued and actively requested by many customers around the world. To meet this demand, Watt Drive is expanding its product range thanks to collaboration with a central European gear manufacturer. This collaboration means that Watt Drive is able to offer the F.. parallel shaft gear unit and the K.. helical bevel gear unit series up to 120 kNm with many additional options across the range.
F.. RX 8.. and K.. RX 8.. series:
The parallel shaft gear units F.. RX 8.. have a 1 - 4 stage design and therefore cover a large reduction range. The thermal power limit of the gear units are between 5.5 kW and max. 445 kW.
The helical bevel gear units K.. RX 8.. have a 1 - 3 stage design, covering thermal power limit 14 kW up to 304 kW.
Gear data:
- Power: 5.5 - 445 kW
- Output torque: up to 120,000 Nm
- Ratio: 1.1 - 800
Output shaft versions:
The following output shaft designs are possible:
?Solid shaft
?Hollow shaft and
?Hollow shaft with shrink disk
Input shaft versions:
The motor can be attached using an IEC coupling adapter for models IEC 71 - IEC 315. Gear unit designs with a free input shaft for attaching various coupling types are also possible.
Gear unit options:
?Backstop devices in the gear unit
?Labyrinth seal rings
?Reinforced bearings
?Fluid couplings
?Elastic couplings
?Swing base
?Gear cooling systems
For further information please see our produt flyer "WATT gear units up to 120 kNm" under the section >> Downloads - Flyer
|
|
|
| Electronic product catalogue - cat4CAD |
|
|
| Electronic product catalogue - cat4CAD |
| Order catalogue |
| EUSAS - System motors catalogue - EUSAS 09 |
|
|
|
