Mavilor Motors Location伺服电机-品牌详细-豪思仪器仪表设备有限公司

DC Servo motors
MSS Series

• Ratings to 6,000 RPM.
• Compact Length.
• Zero Cogging.
• Acceleration Torques to 10 x Rated.

MAVILOR's axial air gap dish armature is specially suited for high response servo drives. High and smooth torque to inertia ratio, non cogging torque low speed velocity control makes MAVILOR the motor of choice for the most exacting applications.

The MAVILOR MSS Series servomotors provide a 20% increase in power to weight and volume ratios and a 20% increase in power rate and acceleration capability over previous designs.

Incorporating an ironless rotor design, these industrial strength motors have an extremely long brush life and high efficiency.

MAVILOR MSS Series motors incorporate options of tachometers and fail-safe holding brakes within the motor structure, and in many cases are half the length of equivalently rated conventional motors.

DC Servo motors
CML Series

• Small dimensions.
• Radial magnetic flux.
• High performances.
• Square format.

西班牙Mavilor <wbr>Motors <wbr>Location伺服电机

download Technical Specifications

PDF Hi Resolution

PDF Screen Resolution

DC Servo motors
MS -EE xdllC Series

EExdIIC Series are axial air-gap servomotors housed in an enclosure into which gas can gain access: the gas can be ignited within the enclosure without the explosion damaging the enclosure or being transmitted to any flammable atmosphere external to the enclosure. These motors comply with the requirements for Apparatus Group IIC specified in EN 50 018 (1977) + A1 to 3 and EN 50 014 (1977) + A1 to 5.
The classification referred to an ambient temperature of 70ºC is:

T5 for
MS-2 / MS-12 / MS-22
MA-3 / MA-20 / MA-30

T3 for
MS-4 / MS-6 / MS-8
MA-6 / MA-10

D.C. and A.C. "brushless" motors are included in the EExdIIC Series, incorporating options of tachometer, resolver and parking brake fitted internally.

AC Servo motors
XtraforsPrime

Technical data

Standard version
– Resolver feedback
– Shaft with keyway
– Protection IP-65
– Rotatable angled connectors
– PTC thermal sensor
– RoHS conform
– UL conform (UL-listed pending)

Options
– Various types of incremental encoders,
SinCos encoders, Hiperface, EnDat
– Shaft without keyway
– Protection IP-67
– Shaft seal
– Straight connectors
– Direct cable output
– NTC thermal sensor

Customized versions
– Shafts (i.e. hollow shafts)
– Flanges, housings
– Windings
– Connections
– Executions according to customer’s

Specification
The modular construction concept is the basis for the wide range of standard models. The slotless stator design results in outstanding technical properties such as high speed, high torque, zero cogging, minimal torque ripple, high efficiency and high rigidity. Thus, these motors are perfectly suited for various demanding servo applications.

AC Servo motors
MA - EE xdllC Series

AC Servo motors
MA Series

• The short mechanical time constant makes it ideal for control operations.
• An extremely short electrical constant provides high peak torque at high speed.
• A high "theoretical" acceleration gives an extremely fast response time.
• High stall torque due to the absence of commutator bars.
• Low thermal resistance provides low working temperatures.
• High power to weight ratio, ideal for manipulator mounted motors.
• Air gap design, small diameter and short length.
• For many applications a separate position sensor is not required, the resolver can be used for deriving a position feed back signal as well as speed/current information.

AC Servo motors
MSA Series

• Very compact.
• Reduced diameter and length.
• Axial magnetic flux.
• Low cogging torque.
• Excellent torque/weight/volume ratio.

download Technical Specifications

PDF HiResolution

PDF Screen Resolutio

AC Servo motors
BL 40 / 50 / 70 Series

The BL Series incorporates the option of a fail-safe holding brake within the structure of the motor. Brake option is not available in a short length version.

download Technical Specifications

PDF HiResolution

PDF Screen Resolution

BL-Series.DXF

AC Servo motors
BL 110 / 140 / 190 Series

The BL Series are synchronous electrical servomotors, with 3 winding phases, supplied with Sinusoidal or Trapezoidal current wave forms. The Feed-Back devices that produce the synchronization signal and speed (position, also in the Sinusoidal case), are Resolver (BLS Series) or Hall effect devices (BLT Series).
This "BRUSHLESS" technology provides:

• High dynamic response.
• Full speed condition, not limited by the "Brush Sparking effect".
• High thermal and dynamic characteristics, because of the motor's windings which are located in the stators.
• Very low maintenance.
• Connection box with four available positions from the standard construction.

AC Servo motors
BLS / BLT 48VDC Series

Text description coming soon

download Technical Specifications

PDF Hi Resolution

PDF Screen Resolution

AC Servo motors
MLL Series

New Mavilor series with elongated configuration and slotless stator that prevents reluctance variation in the rotor movement, which translates as:

• No cogging torque
• Minimal ripple torque
• Almost no losses in magnets
• Increased efficiency
• Possibility for high-speed rotation

download Technical Specifications

PDF Hi Resolution

PDF Screen Resolution

AC Servo motors
BF Series WASHDOWN Mavilor Motor

• Smooth Edges
• Stainless Steel Housing and Shaft
• IP 67

Synchronous electrical servomotors with 3 winding phases, supplied with sinusoidal current wave forms. The feed- back device is a resolver (BFS Series)

download Technical Specifications

PDF Hi Resolution

PDF Screen Resolution

Rolivam
Tachogenerators

ROLIVAM TACHOGENERATORS are designed and produced by a leading manufacturer of precision A.C. and D.C. servomotors. They have been designed to stop, position, accelerate or change direction without cogging and with fluctuations of less than 1.5 % (pp).

Electro-mechanic configuration with winding on 2 parallel branches, four brushes (2 on each line), a coppersilver alloy commutator with a great number of segments, good surface finish, rare-earth permanent
magnets, very low inertia and high manufacturing quality.

This means that the ROLIVAM TACHOGENERATORS insure reliable transmission of the output signal and contributes to the ultrafast response in situations where rapid reversals are an essential element in the servo-drive system, without cyclic variation.

D-23 A

D-25 A

D-26

D-40

D-41 A

D-41 B

Rolivam
Brakes

These Electro-Magnetic Brakes are Single Disc units which operate on the Fail Safe principle. Functionally the brake is released by energisation of the operating coil with D.C. supply, and is applied by interruption of the coil current or power failure.

download Technical Specifications

PDF Hi Resolution

PDF Screen Resolution

Drives

The CD1 and the SMT-BD1 Series are PWM digital servo amplifiers that provide control for AC sinusoidal motors (brushless) with transmitter resolver in their basic execution. Both control the motor torque and the speed, and are they available as a stand-alone single axis block, either at 230VAC or 400/480 VAC.

In addition, the SMT-BD1 is available in a 19" rack multi-axis plug in version, which includes the power supply.

The two types use a common Set up software IBM-PC compatible, for WINDOWS® operating system, called BPCW. This features the display of all the amplifier parameters, and their easy modification, together with the auto-tuning and the auto-phasing automatic functions

The MSD1 series are designed as digital four-quadrant amplifiers in transistor technique for the control of the servomotors.

CD1a

SMTBD1

Options

Mavilor´s motors can be available with an encoder Kit option and fitted encoder.
Dimensions of flange and shaft can be tailored according to cutomer´s requirements.
Cable assemblies or separate cables are also available.