Motrona GMBH编码器 传感器 信号转换器
德国Motrona GMBH编码器 传感器信号转换器
产品系列:
Signal Converters Frequency 信号转换器频率
Signal Converters Analogue 模拟信号转换器
Signal Converters SSI 小型工业信号转换器
Signal Converters Incremental 增量信号转换器
Level Converters TTL-RS422-HTL平变换器
Encoder Distributors and Splitters编码器分配器
Frequency Dividers and Multipliers除频器和乘法器
Interface for SinCos Encoders编码器接口
Signal Converter Frequency >>> Voltage - Current - Analogue - Serial
|
|
DZ 266: Signal Converter Frequency >>> Analogue (Voltage, Current)) and Serial RS 232
|
|
|
- Multifunctional f-V and f-I converter module with fast response time and many programmable features for conversion of frequencies to voltage, to current or to serial data format
- Scalable LCD display for indication of the actual input frequency and the operating state
- Universal impulse imputs for use with single channel signals (A only),
quadrature signals (A, B, 2x90°) or differential TTL / RS422 signals
A, /A, B, /B
- Analogue outputs +/- 10 V (polarity represents direction of rotation) and
0/4 – 20 mA, resolution 14 bits
- Wide operationg range: 0,1 Hz bis 1 MHz
- Setup by means of the front keys and LCD menu, or by PC
- Serial RS232 interface
- Power supply 24 VDC, auxiliary output +5V for supply of TTL encoders
- DIN rail mounting
|
|
|
|
_____________________________________________________________________________
|
|
|
FU 252: Signal Converter Frequency >>> Analogue (V, I) and Serial RS 232 / 485
|
|
|
- High performance frequency-to-analogue and frequency-to-serial converter with outstanding features and multiple conversion modes.
- The unit can convert all frequencies, but also the sum, the difference, the product or the ratio of two frequencies to analogue and to serial format.
- Wide input range from 1 Hz to 1 MHz for full scale output
- Input accepts quadrature encoder signals with TTL/RS422 format or with HTL level (A,B) as well as single channel signals from sensors with PNP or NPN or Namur output
- Analogue outputs +/- 10 V (polarity represents direction of rotation) and
0/4 – 20 mA, resolution 14 bits
- Serial RS232 and RS485 interface for read-out of the actual input frequency
- Conversion time only 1 msec., therefore also suitable as a tacho replacement
- Accuracy 0.1%
- Easy to set up by simple TEACH procedure, or by PC (operator software included)
- Adjustable floating average filter to smooth output swings with unsteady input frequencies
- Free programmable linearization curves
- Power supply 18-30 VDC, aux. voltage output 5V for encoder supply
- For 115/230 VAC supply see accessories
|
Signal Converter Analogue (Voltage, Current) >>> Frequency and Serial
|
|
UF251: Signal Converter Analogue (V, I) >>> Frequency - Serial RS232 and RS485
|
|
|
- High performance analogue-to-frequency and analogue-to-serial converter with excellent features and multiple conversion modes.
- Input range:-10V...+10V / 0/4...20mA
- Conversion time approx. 1ms only
- Quadrature frequency outputs HTL (A/B/Z) from 1 Hz to 100 kHz and
TTL differential / RS422 (A,/A, B,/B, Z,/Z) from 1 Hz to 500 kHz
- Phase A/B depending on polarity of input signal, marker pulse output with programmable distance.
- Various user modes: Programmable V / f characteristics, Motorized potentiometer function, cyclic frequency output curves etc.
- RS232 and RS485 interface for serial readout of the conversion result and other internal registers
- Adjustable floating average filter as well as operator programmable linearization curves
- Printer mode for automatic data transfer of internal registers to a data logger or PC
- For 115/230 VAC supply see accessories
|
|
Signal Converter Analogue (Voltage, Current) >>> Frequency and Serial
|
|
UF251: Signal Converter Analogue (V, I) >>> Frequency - Serial RS232 and RS485
|
|
|
- High performance analogue-to-frequency and analogue-to-serial converter with excellent features and multiple conversion modes.
- Input range:-10V...+10V / 0/4...20mA
- Conversion time approx. 1ms only
- Quadrature frequency outputs HTL (A/B/Z) from 1 Hz to 100 kHz and
TTL differential / RS422 (A,/A, B,/B, Z,/Z) from 1 Hz to 500 kHz
- Phase A/B depending on polarity of input signal, marker pulse output with programmable distance.
- Various user modes: Programmable V / f characteristics, Motorized potentiometer function, cyclic frequency output curves etc.
- RS232 and RS485 interface for serial readout of the conversion result and other internal registers
- Adjustable floating average filter as well as operator programmable linearization curves
- Printer mode for automatic data transfer of internal registers to a data logger or PC
- For 115/230 VAC supply see accessories
|
|
Level Conversion: Converters TTL - RS422 - HTL, Potential Separators
|
|
PU202: Level Converter HTL >>> TTL / RS422 (no potential separation)
PU204: Level Converter TTL / RS422 >>> HTL (no potential separation)
|
|
- PU 202: Level converter for incremental encoders from HTL (A,B,Z, 10-30V) to TTL/RS422 standard, max. 200 kHz
- Direction decoder for translation of different standards of direction signals to the quadrature standard (see drawing)
- Power supply 5 VDC
- PU 204: Level converter for incremental encoders from TTL/RS422 standard to HTL (A,B,Z, 10-30V) , max. 200 kHz
- Direction decoder for translation of quadrature input signals to other standards
(see drawing)
- Power supply 10-30 VDC
Both units are available as open p.c. boards with a frame for DIN rail mounting
|
|
|
|
|
___________________________________________________________________________
|
|
|
PU210: Universal Level Converter with Full Galvanic Potential Separation
|
|
- Signal inputs A, /A, B, /B, Z, /Z adjustable to TTL/RS422 level or to HTL (10-30V) level
- Signal outputs A, /A, B, /B, Z, /Z (push-pull), output level depending on remote voltage (Vext. = 5 - 30V)
- Potential separation between input and output by high-speed inductive coupler
- Suitable for conversion of a A/B quadrature direction signal to a static direction signal and vice-versa
- Connection by choice via SUB-D-connector or via screw terminal strips
(parallel circuit)
|
|
|
___________________________________________________________________________
|
|
|
|
GV210: Dual Universal Level Converter (no galvanic separation)
|
|
|
- Universal encoder interface, applicable as dual level converter, encoder splitter and encoder cross switch.
- Two encoder inputs A, B, Z, and /A, /B, /Z, each individually adjustable to either TTL/RS422 level or to HTL (10-30V) level.
- Two signal outputs A, B, Z and /A, /B, /Z, likewise individually adjustable to either TTL/RS422 or HTL (10-30V) level
- Contactless and bounce-free switchover between the encoder channels, by remonte 24 volt control signals.
- Power supply 12-30 volts DC, auxiliary output 5 volts (2x125mA) for encoder supply.
|
|
|
|
___________________________________________________________________________
|
|
|
IT251: Universal Level Converter with Frequency Divider and Direction Decoder
|
|
|
- Level converter for incremental encoder signals A/B/Z to both directions
(RS422 / TTL to HTL and HTL to RS422 / TTL, see drawing)
- Additional impulse divider for error-free division of quadrature encoder signals, with adjustable ratio from 1:1 to 1:4096 and separately adjustable marker pulse divider
- Translator between various modes of indication of the direction of rotation
- Max. input frequency 300 kHz
- Power supply 18 - 30 VDC
- Compact housing for DIN rail mounting
- For 115/230 VAC supply see accessories
|
Signal Converter Incremental Count >>> Analogue and Serial
|
|
ZU 252: Signal Converter incremental quadrature count >>> analogue (voltage, current)
and serial RS232 / RS485)
|
|
|
-
This unit is suitable to convert angular and positional information from a quadrature encoder to analogue and serial format
- Signal converter for use with all incremental encoders, proximitiy switches etc. either with TTL/RS422 output or with HTL (10-30V) output
- Analogue outputs +/- 10V, 0-20 mA or 4-20 mA, proportional to the encoder position
- RS 232 and RS 485 serial interface for readout of the actual encoder position
- Easy to set up by simple TEACH procedure, or by PC (operator software see Download)
- Free scaling, programmable linearisation curves etc.
- For 115/230 VAC supply see accessories
________________________________________________________________
Please observe that also also some of our panel counter models are suitable for conversion of incremental information to analogue and serial
(see Electronic Counters)
|
|
Signal Converter Incremental Count >>> Analogue and Serial
|
|
ZU 252: Signal Converter incremental quadrature count >>> analogue (voltage, current)
and serial RS232 / RS485)
|
|
|
-
This unit is suitable to convert angular and positional information from a quadrature encoder to analogue and serial format
- Signal converter for use with all incremental encoders, proximitiy switches etc. either with TTL/RS422 output or with HTL (10-30V) output
- Analogue outputs +/- 10V, 0-20 mA or 4-20 mA, proportional to the encoder position
- RS 232 and RS 485 serial interface for readout of the actual encoder position
- Easy to set up by simple TEACH procedure, or by PC (operator software see Download)
- Free scaling, programmable linearisation curves etc.
- For 115/230 VAC supply see accessories
________________________________________________________________
Please observe that also also some of our panel counter models are suitable for conversion of incremental information to analogue and serial
(see Electronic Counters)
|
|
Frequency Divider (Impulse Divider) and Frequency Multiplier (Impulse Multiplier)
|
|
IT251: Quadrature Frequency Divider, Level Converter and Direction Translator
for Encoder Signals
|
|
- Impulse and frequency divider for incremental encoder signals
- Error-free division of quadrature encoder signals, with adjustable ratio from 1:1 to 1:4096,
with separately adjustable divider for marker pulse
- Level converter for incremental encoder signals A/B/Z to both directions
(TTL / RS422 to HTL and HTL to TTL / RS422, see drawing)
- Includes also translation between various modes of indication of the direction of rotation
- Max. input frequency 300 kHz
- Power supply 18 - 30 VDC
- Compact housing for DIN rail mounting
|
|
|
_______________________________________________________________________________
|
|
FM 260: Quadrature Frequency and Impulse Multiplier
|
|
|
- This universal impulse and frequency multiplier provides one encoder input and one encoder output, both using channels A, /A, B, /B, Z, /Z with programmable levels and characteristics.
- The unit provides error-free multiplication of an input frequency by a proportional factor F1 and a reciprocal factor F2, both adjustable in a range of 0.0005 to 9.9999. The result appears at the frequency output :
- More properties:
- Index and marker pulse generator: The unit generates an index pulse with a programmable impulse distance, which - if required - can be synchronized with the input marker pulse.
- All operation modes provide error-free frequency conversion, with full consideration of the A / B phase and direction of the quadrature signals, therefore no cumulative errors, even with continuous change of directions and vibrations.
- Max. frequency 1 MHz on input and output, Power supply 18 – 30 VDC
- RS232 interface and USB port, optional PROFIBUS-DP interface available
|
|
Sine-Cosine Signal Splitter, Interpolator and SinCos-to-Incremental Converter
|
|
New:
|
|
|
|
SV 210: Signal Distributor / Splitter and Incremental Converter
for Sine-Cosine Encoder Signals
|
PDF: Data sheet
PDF: Operating Instructions
|
|
|
|
|
- Inputs for encoder lines sin+ / sin- / cos+ / cos- / ref+ / ref- with 1 Vpp format
- Two sine-cosine output channels similar to input signal
- Two incremental quadrature outputs, each A, /A, B, /B, Z, /Z , with individually selectable output levels TTL/RS422 or HTL (10-30V)
- Maximum operating frequency 500 kHz
- Power supply 17 - 30 VDC,
- Auxiliary output for encoder supply, selectable to 5 V or 24 V
|
|
|
|
|
Signal Converters SSI Encoder >>> analogue - serial RS232 / RS485
and SSI Encoder >>> parallel - seriell RS232
|
|
-
IV251: Converter from SSI to Analogue (Voltage / Current)l
and to Serial RS232 / RS485
- SSI Signal converter suitable for use with all SSI type sensors and absolute encoders from 9 to 25 bits, either with Master mode or with Slave mode
- Analogue outputs +/- 10V, 0-20 mA or 4-20 mA, proportional to the encoder position
- RS 232 and RS 485 serial interface for readout of the actual encoder position
- Easy to set up by simple TEACH procedure, or by PC (operator software see Download)
- Free scaling, programmable linearisation curves, bit blanking functions etc.
- For 115/230 VAC supply see accessories
|
|
|
|
_______________________________________________________________________________
|
|
|
-
IP251: Converter from SSI to Parallel (BCD, Binary, Gray)
and SSI to Serial RS 232
- SSI Signal converter suitable to convert SSI data from an absolute encoder or sensor to parallel data, either with Master or Slave operation
- Also suitable for conversion of serial RS232 data to a parallel data format
- 25 bits parallel outputs, push-pull and short-circuit-proof, programmable output codes: Binary, Gray or BCD
- RS232 serial link for readout of sensor data
- Multiple facilities for scaling and linearization of parallel output data
- Easy to set up by DIL switches or by PC (operator software see Download)
- For 115/230 VAC supply see accessories
|
Model
|
Figure
|
Inputs
|
Outputs
|
Function, Potential Conditions
|
GV 204
|
|
1 x
A, /A, B, /B, Z, /Z
Input level
RS422 / TTL or HTL
(adjustable)
|
2 x
A, /A, B, /B, Z, /Z
Output levels
RS422 / TTL or HTL
(individually adjustable)
|
Distributor / Splitter
for incremental encoders
- no potential separation -
|
__________________________________________________________________
|
|