Bei Ideacod编码器

法国艾迪克Bei Ideacod编码器

产品系列：

ATEX CERTIFIED
The most complete range of the ATEX encoders market has been developped by BEI IDEACOD: explosion proof and intrinsically safe encoders.
>> Pulsatex+
Delivering pulses, PULSATEX encoders are available with a 12mm solid shaft or a 30mm hollow through shaft. Certified EEx d IIC T6, they have been developped for category 2 applications: zone 1 (gas) and 21 (dust).
Serie   GAMX Ø 116 mm   GAUX Ø 109 mm                   Shaft   Solid 12 mm   Through hollow 30 mm                   Circuits   - 5V RS422 - push-pull 11-30 V - Supply 11-30 V, out 5V RS422 - Transistorised push-pull 11-30V   - 5V RS422 - push-pull 11-30 V - Supply 11-30 V, out 5V RS422 - Transistorised push-pull 11-30V                   Resolution   max 10000 points/tour   max 10000 points/tour                   Documentation                       EC type examination certificate
			II 2 G/D EEx d IIC T6 Category 2, zone 1 (gas) and 21 (dust)
>> Intratex
After the success of the marketing of its flame-proof encoders, BEI IDEACOD launches INTRATEX: range of incrémental encoders with intrinsic safety. These encoders are especially designed for explosive atmosphere gas or dust. Their grounds of application are the chemical industry (painting, solvent, perfumes, rubber), the textile, the food one, wood, storage or petrochemistry.... They are labeled Ex II 1G/D, Eex ia IIC/b T4.
Standard Ø 58 mm   Heavy-Duty Ø 90 mm                   Serie   IHM5   IHO5   IHM9                   Shaft   Solid 6 and 10 mm   Through hollow 6 -14 mm   Solid 11 and 12 mm                   Electronic circuits   - Push-pull 8-12V - Line driver RS422 supply 4,5-6V   - Push-pull 8-12V - Line driver RS422 supply 4,5-6V   - Push-pull 8-12V - Line driver RS422 supply 4,5-6V                   Resolution   max 96000 ppr, programmable   max 96000 ppr, programmable   max 96000 ppr, programmable                   Operating T°C   -40°C +70°C   -40°C +70°C   -40°C +70°C                   Documentation (PDF)   -Standard     -Paramétrable   -Standard     -Paramétrable                       EC type examination certificate
			Ex II 1G/D, EEx ia IIC/B T4 Category 1, zone 0 (gas) and 20 (dust).
>> Velatex
Offering a speed in the form of impulses and/or an analogical tension, encoders VELATEX are labeled EEx D IIC T6. Ideal for an operation of category 2 zone 1 gas and dust.
Serie   NAMX Ø 116 mm           Shaft   Solid 12 mm           Circuits   - Incremental signals: 5V RS422, 15-30V push-pull - Analog signals: 0-10V, 4-20mA, 0-20mA           Resolution   max. 10000 ppr           Documentation   -Optotacho     -Tacho-encoder           EC Type examination certificate
		II 2 G/D EEx d IIC T6 Category 2, zone 1 (gas) and 21 (dust)
>> Posatex
Delivering an absolute position, POSATEXTM singel or multi turn encoders are certified EEx d IIC T6, they have been developped for category 2 applications: zone 1 (gas) and 21 (dust)
Serie   CAMX Ø 116 mm   CAUX Ø 109 mm   SAUX Ø 109 mm                   Shaft   Solid 12 mm   Through hollow 30 mm   Through hollow 30 mm                   Circuits   Parallel: - 5V -Push-pull 11-30V   - SSI   - SSI -CANopen -DeviceNet                   Resolution   max 14 bits   max 13 bits   max 13x16 bits                   Codes   Gray, Binaire   Gray, Binaire   Gray, Binaire                   Documentation       -CANopen     -SSI     -DeviceNet                   EC type examination certificate
		II 2 G/D EEx d IIC T6 Category 2, zone 1 (gas) and 21 (dust)
>> Intrinsic safety barrier
A single barrier integrates the protected power and a protection for each outputsignal of the encoder.
Serie   924-60004-002   924-60004-003   924-60004-004                   Barrier supply Vcc   12-24V   12-24V   12-24V                   Output   V out = 5V compatible TTL & RS422   V out = V nominal   Open collector                   Electronic   Line driver 4469 100mA source/sink   Line driver 7272 100mA source/sink   NPN 40mA source/sink                   Integrated supply for encoder   5V +/-5%, 100mA nom.   5V +/-5%, 100mA nom.   5V +/-5%, 100mA nom.                   Documentation                         EC Type examination certificate
		Ex II 1G/D, EEx ia IIC/B T4 Category 2, zone 0 (gas) and 20 (dust).

TACHOENCODERS - OPTOTACHOS
The tachoencoders and the optotachos use the non-contact opto-electronic reading device of the incremental encoders. The optical system provides immunity to electromagnetics interference and noise. The analogic output is obtained by conversion of the frequency into a proportional current or voltage. The tachoencoders provide: - the signals of an incremental encoder - linear analogic signal depending on the rotation speed of the encoder The optotachos provide analogue signal only.
>> Robustech
The Tacho-encoder - Opto-tacho ROBUSTECH with a diameter of 90 mm of BEI IDEACOD are designed to resist the loads, the shocks and the extreme vibrations. Their LED with controlled emission and their robust electronic guarantees an exceptional optical and electronic longevity.
Serie   NHM9 Ø 90 mm   NHU9 Ø 90 mm               Shaft   Solid 11 and 12 mm   Through hollow 30 mm               Circuits   Incremental output: - 5V RS422 - Push-pull 15-30Vdc Analogic output: - 0...10Vdc, -10...+10Vdc - 4...20mA, 0...20mA, -20...+20mA   Incremental output: - 5V RS422 - Push-pull 15-30Vdc Analogic output: - 0...10Vdc, -10...+10Vdc - 4...20mA, 0...20mA, -20...+20mA               Resolution   max 10000 ppr   max 10000 ppr               Calibration speed   10 to 9000 turn/min   10 to 6000 turn/min               Documentation   -Optotacho     -Tachoencoder   -Optotacho     -Tachoencoder
>> MAXXencoder
The 200 mm NHML encoder has been designed for special heavy duty application; Glass mill, steel mill, locks, ...
Serie   NHML Ø 200 mm           Shaft   Solid 14 mm           Circuits   Incremental output: - 5V RS422 - Push-pull 15-30Vdc Analogic output: - 0...10Vdc, -10...+10Vdc - 4...20mA, 0...20mA, -20...+20mA           Resolution   max 10000 ppr           Calibration speed   10 to 6000 turn/min           Documentation   -Optotacho     -Tachoencoder

Sensors with cable
IDEACOD, the leader of the rotary sensor, offers also solutions with linear sensor. The sensor with cable does not need precise linear guidance. It is especially adapted to severe industrial environment : iron and steel industry, metallurgy, industry of wood (sawmills, joineries), etc... Principle of operation : a cable of measurement out of stainless steel, of great flexibility coated with a film polyamide, is rolled up and been held on a drum of precision. With the cable of measurement is associate interdependent of the drum, an optical encoder, of technology incremental, absolute, analogical or potentiometric..
Serie   CD50   CD60   CD80                           Length range (mm)   Encoder   0-1200   0-1500   0-2500                       Potentiometer   0-1200   0-1500   0-2500                       Resolution (Pulse/mm)   Incremental   1-5-10-25   1-5-10-25   5-10-20                       Absolute   -   max. 54,61   max. 40                       Analog   quasi-infinite   quasi-infinite   quasi-infinite                       Linearity total length   Encoder   +/-0,05%   +/-0,05%   +/-0,05%                       Potentiometer   +/-0,15%   +/-0,15%   +/-0,15%                       Protection   Encoder   IP65   IP65   IP65                       Potentiometer   IP67   IP67   IP67                       Documentation
Serie     CD115   CD150                     Length range (mm)   Encoder     0-3500   0-5000                 Potentiometer     0-3500   0-4000                 Resolution (Pulse/mm)   Incremental     5-10-20   5-10-20                 Absolute     max. 27,3   max. 20                 Analog     quasi-infinite   quasi-infinite                 Linearity total length   Encoder     +/-0,05%   +/-0,05%                 Potentiometer     +/-0,15%   +/-0,15%                 Protection   Encoder     IP65   IP65                 Potentiometer     IP67   IP67                 Documentation