To use the most modern engineering in the industry is indispensable, especially if competitiveness shall be ensured. We are leading in the technology of optical surfaces control systems. Therefore we can offer everything from one hand. Starting with standard systems up to complete solution orientated systems for the customer.
Our Color Matching Process works according to the principle of off-color reinforcement. Each object takes the color of the wavelength which it reflects most of all. For the human eye minimal differences between similar colors are hardly perceivable. As a consequence, vehicle components that seem to match in terms of color under articial lighting conditions in the plant can suddenly show marked differences when they are regarded under daylight conditions.
Depending on the application either a robot or a tripod with a colorimeter head is employed in color measurement. In order to detect possible color differences, the colorimeter head first measures the light reflected from the master sample from different angles, based on a light produced by a reference light source.
Our Flatscan-System is a measuring method to detect very small defects in bodyshell work such as pits, dints and dents with a level difference of more than 5µm. The system consists of several LED optics which are positioned on a circle-segment above the object under inspection. This allows a hundred percent control of differently shaped components while the production process is full swing.
Many of our products work with special software. Therefore it is possible to incorporate updates and enhancements immediately.